For these devices the microcontroller needs to be super cheap. Microcontrollers like the Puya PY32 Series (e.g., PY32C642, PY32F002/F030) can cost in the $0.02 - $0.05 range for the kind of many-million volumes applicable for disposable vapes. These are 32-bit ARM Cortex M0 MCUs, running at a 24 MHz clock or similar, some with 24 KB of ROM and maybe 3 KB of RAM!
To put into context: this is 3x the ROM/RAM of the ZX81 home computer of the early 1980s. The ARM M0 processor does full 32-bit multiplication in hardware, versus the Z80 that doesn't even offer an 8-bit multiply instruction. If we look at some BASIC code doing soft-float computation, as was most common at the time, the execution speed is about 3 orders of magnitude faster, while the cost of the processor is 2 - 3 orders of magnitudes less. What an amazing time we live in!
Which is why when folks nowadays say "you cannot use XYZ for embedded", given what most embedded systems look like, and what many of us used to code on 8 and 16 bit home computers, I can only assert they have no idea how powerful modern embedded systems have become.
Now that it is a pity that when people talk about saving the planet everyone keeps rushing to dispoable electronics, what serves me to go by bycicle to work, be vegetarian, recicle my garbage, if everyone is dumping tablets, phones and magnificient thin laptops into the ground, and vapes of course.
> Which is why when folks nowadays say "you cannot use XYZ for embedded", given what most embedded systems look like, and what many of us used to code on 8 and 16 bit home computers, I can only assert they have no idea how powerful modern embedded systems have become.
Yet, I still need to wait about 1 second (!) after each key press when buying a parking ticket and the machine wants me to enter my license plate number. The latency is so huge I initially thought the machine was broken. I guess it’s not the chip problem but terrible programming due to developers thinking they don’t need to care about performance because their chip runs in megahertz.
There's no pressure to make a good product because nobody making this decision has to use the machine. Everywhere I've worked purchase decisions are made by somebody with no direct contact to the actual usage, maybe if you're lucky they at least asked the people who need the product what the requirements are, otherwise it's just whatever they (who don't use this product) thought would be good.
"Key presses are 15x slower than they should be" gets labelled P5 low priority bug report, whereas "New AI integration to predict lot income" is P0 must-fix because on Tuesday a sales guy told a potential customer that it'd be in the next version and apparently the lead looked interested so we're doing it.
While this is a decision-making problem, it is also an engineering incompetence problem. No matter what pointy haired boss is yelling about "priorities" ultimately software developers are the ones writing the code, and are responsible for how awful it is.
When it comes to priorities about what to write and what to focus on, the buck stops at management and leadership. When it comes to the actual quality of the software written, the buck stops at the developer. Blame can be shared.
Certainly one of the benefits of my "Fuck Off Fund" is that for a good many years now it has enabled me to be unburdened by concerns about whether I might get fired for saying what I think to management.
I'm at much lower risk than the imagined target of the "Fuck Off Fund" concept for things like inappropriate sexual contact or coercive control, but I find it really does lift a weight off you to know that actually I don't have to figure out whether I can say Fuck Off. The answer to that is always "Yes" which leaves only the question of whether I should say that. Sometimes I do.
And you know, on zero occasions so far have I been fired as a consequence of telling management to fuck off. But also, I had to think hard about that because, thanks to the fund, I had never worried about it. I've been fired (well, given garden leave, same thing) but I have no reason to think it's connected to telling anybody to fuck off.
Precisely this. We love to put our colleagues as competent victims of the system, but a competent engineer is unlikely to build an embeeded UI with high latency at their first try. It's a combination of cheap, underqualified labour and careless management.
> When it comes to the actual quality of the software written, the buck stops at the developer. Blame can be shared.
No. The quality is not prioritized by management. A dev that fails to ship a feature because they were trying to improve "quality" gets fired.
We have no labor power because morons spent the good times insisting that we don't need a professional organization to solve the obvious collective action problem.
The idea that workers are not responsible for their own competence or the quality of their work output is such a bizarre take that you really only see on HN. Just because nobody is forcing you to write quality code, doesn't mean you shouldn't. Nobody is forcing you to bathe or brush your teeth, either, so why do we do it?
My first guess was debouncing. They assume that the switches are worn out, deeply weathered, and cheaply made. Each press will cause the signal to oscillate and they're taking their sweet time to register it.
When the device is new this is an absurd amount of time to wait. As the device degrades over 10, 20 years, that programming will keep it working the same. Awful the entire time, yes, but the same as the day it was new.
Debouncing would be smart, sure. But sometimes, these sorts of embedded machines are weirder than that.
At Kroger-brand gas stations near me, I get to interact with the buttons on gas pumps to select options and enter a loyalty ID.
Those buttons have visible feedback on a screen, and also audible feedback consisting of a loud beep. And there's always delays between button press and feedback.
Some combination of debounce and wear might explain that easily enough.
Except... the delay between pushing a button and getting feedback is variable by seemingly-random amounts. The delay also consistently increases if a person on the other side of the pump island is also pushing buttons to do their own thing.
It's maddening. Push button, wait indeterminate time for beep, and repeat for something like 12 or 13 button presses -- and wait longer if someone else is also using the machine.
I can't rationally explain any of that variability with debounce.
Or perhaps the original programmers skipped the class on concurrency 25 years ago, and nobody has subsequently bothered to pay anyone to update that part of the software.
One time I decided to test whether these grocery story loyalty card XX cents off per gallon transactions were properly isolated, when my wife and I were both filling up vehicles at the same gas station at the same time. We both got the $0.50 discount per gallon with no problem. I'm sure there are lots of creative ways you can exploit the poor design of these things.
I was late for a train at my local station and the parking machine was taking ages to respond to keypresses. I could see the training pulling up to the platform and I was still stuck entering the second digit of seven. In my shameful frustration I hit the machine fairly hard. While the button presses might take a while to register, the anti-tamper alarm has really low latency and is also quite loud.
You need to find the right person to complain to. Here we are sympathetic, but can't do anything.
The right person is the other riders on the train - but the hard part is to frame this such that they join you on a march to the the agency that owns that machines to complain. I wish you the best of luck figuring out how to do that (I don't know how to do it - and if I did there are might higher priority things that need to be fixed).
That's programmer incompetence. Unfortunately pervasive, especially with devices like parking meters, EV chargers, and similar, where the feedback loop (angry customer) is long (angry customers resulting in revenue decrease) or non-existent.
It's a nice theory, but many of those terrible parking ticket machines predate smartphones, so it might be the case for machines built now, but it's really hard to imagine that that was the original intention
Sorry to rant, but this kind of stuff is the only thing that triggers me. It's gotten so bad that my family makes me put a dollar in a 'complain jar' everytime I talk about how poor quality software has become.
Just one recent example: few months ago, I replaced a Bosch dishwasher with the latest version of the same model. Now, when I press the start button to initiate the cycle, it takes over 3 seconds for it to register! Like, what is going on in that 3 seconds?
How was it possible that even 'kind of good' developers like me were able todo much more with much less back in the 90s? My boss would be like, "Here's this new hardware thingy and the manual. Now figure out how to do the impossible by Monday." Was it because we had bigger teams, more focus, fewer dependencies?
I think we've been trained to accept bad software at this point, and a lot of people don't know anything different.
I suspect that a lot of it is caused by shoving Android onto underpowered devices because it is cheap and seems like an easy button. But I don't know for sure, that's just an impression. I have no numbers.
Could there be an opportunity here, for a specialized kiosk OS or something like that?
Everyone was locked out in a building am staying at (40 something stories) for several hours. When I asked the concierge if I can have a look at the system, it turns out they had none. The whole thing communicated with AWS for some subscription SaaS that provided them with a front-end to register/block cards. And every tap anywhere (elevators/doors/locks) in the building communicated back with this system hosted on AWS. Absolute nightmare.
Now I am waiting for time when they move us-east-1 physical security to run in us-east-1... Thus locking themselves out when needing some physical intervention on servers to get backup.
A lot of modern glass is hard to break. In many cases this is a safety feature (if you can't break the glass you can't get shoved out the window in a fight...)
This is in SEA. They probably operate from ap-southeast-1 or 2. But yeah, if the internet goes down, the provider service goes down or AWS goes down they are cooked.
Yes, but still probably a million times easier for both the building management and the software vendor to have a SaaS for that, than having to buy hardware to put somewhere in the building (with redundant power, cooling, etc.), and have someone deploy, install, manage, update, etc. all of that.
Easier maybe. But significantly worse. Parts of these systems have been build and engineered to be entirely reliable with automatic hand-overs when some component fails or with alternative routings when some connection is lost.
>than having to buy hardware to put somewhere in the building (with redundant power, cooling, etc.), and have someone deploy, install, manage, update, etc. all of that.
You don't need any of that. You need one more box in the electrical closet and one password protected wifi for all the crap in the building (the actual door locks and the like) to connect to.
The IT guy walks in and replaces/restarts the box instead of waiting for the gods of AWS to descent to earth and restart theirs. They have direct control vs. waiting for something magic to happen.
Have you ever actually seen these systems in person? It's usually a microcontroller which already rules out a ton of stuff you're talking about. Serious places will buy 2-3 of them at the time of installation to have some spares. The ones here are "user-replaceable" as well (unplug these three cables, replace the box, plug them back in). It's not some mysterious bunch-of-wires-on-arduino-pins magic box that nobody dares to touch.
The one at my previous office even had centralized management through an RS232 connection to a PC. No internet and related downtime at all. And I don't recall us ever being locked out because of that.
Its absolutely possible to have both a SaaS based control plane and continue functioning if the internet connection/control plane becomes unavailable for a period. There's presumably hardware on site anyway to forward requests to the servers which are doing access control, it wouldn't be difficult to have that hardware keep a local cache of the current configuration. Done that way you might find you can't make changes to who's authorised while the connection is unavailable, but you can still let people who were already authorised into their rooms.
The doors the system controls don't have any of this. Hell, the whole building doesn't have any of this. And it definitely doesn't have redundant internet connections to the cloud-based control plane.
This is fear-mongering when a passive PC running a container image on boot will suffice plenty. For updates a script that runs on boot and at regular intervals that pulls down the latest image with a 30s timeout if it can't reach the server.
You know what else would suffice plenty? Physical keys and mechanical locks. They worked (and still work) without electricity. The tech is mature and well-understood.
The reason for moving away from physical keys is that key management becomes a nightmare; you can't "revoke" a key without changing all the locks which is an expensive operation and requires distributing new keys to everyone else. Electronic access control solves that.
> Some PC somewhere with storage is a bigger problem
Both an embedded microcontroller and a PC have storage. The reason you can power-cycle a microcontroller at will is because that storage is read-only and only a specific portion dedicated to state is writable (and the device can be reset if that ever gets corrupted).
Use a buildroot/yocto image on the PC with read-only partitions and a separate state partition that the system can rebuild on boot if it gets corrupted and you'll have something that can be power-cycled with no issues. Network hardware is internally often Linux-based and manages to do fine for exactly this reason.
A large number of embedded micro controllers are just PCs running Yocto linux configured as GP said. You can save money with a $.05 micro controller, but in most cases the development costs to make that entire system work are more than just buying an off the shelf raspberry pi.
It's also easier to keep all the water for fighting fires in trucks that are remote, than to run high pressure water pipes to every room's ceilings, with special valves that only open when exposed to high heat. Imagine the overhead costs!
A card access system requires zero cooling, it’s a DC power supply or AC transformer and a microcontroller that fits in a small unvented metal enclosure. It requires no management other than activating and deactivating badges.
There is no reason to have any of the lock and unlock functionality tied to the cloud, it’s just shitty engineering by a company who wants to extract rent from their customers.
The server running that system needs cooling, yes. You can't just shove it in a closet with zero thought and expect it to not overheat/shut down/catch fire, unless you live in the Arctic.
That is, in fact, exactly what we typically see in reality with local access control system head-ends.
At the doors, there might be keycards, biometrics and PINs (oh my!) happening.
But there's usually just not much going on, centrally. It doesn't take much to keep track of an index of IDs and the classes of things those IDs are allowed to access.
I have a little fanless mini PC that runs various stuff around my house, including homeassistant. The case is basically a big heat sink.
It started crashing during backups.
The solution was to stick a fan on it. :( This is literally a box _designed to not need a fan_. And yet. It now has a fan and has been stable for months. And it's not even in a closet - it's wall-mounted with lots of available air around it.
I'm guessing it's the HDD that's failing. Had such mysterious failures with my NVR (the Cloud Key thingie) from UniFi. Turns out, HDDs don't like operating in 60+ degree Celsius heat all the time - but SSDs don't mind, so fortunately the fix was just to swap the drive for a solid state one.
There are card access systems that don’t require a computer, just a microcontroller. Perhaps if you need to integrate with multiple sites or a backend system for access control rules you can add computers, but card access systems are dead ass simple for a reason; they need to be reliable. The good systems that have computers still allow access in the event of a network failure.
Any access control system that fails in the event that it loses internet connectivity is poorly designed.
The system was not built with resiliency in mind and had no care/considerations for what a shit-show will unfurl once the system or the link goes down. I wonder if exit is regulated (you can still fully exit the building from any point using the green buttons and I think these are supposed to activate/still work even if electricity is down).
> Yes, but still probably a million times easier for both the building management and the software vendor to have a SaaS for that, than having to buy hardware to put somewhere in the building (with redundant power, cooling, etc.)
A isolated building somewhere in the middle of the jungle dependent for its operation on some American data-center hundreds of miles away is simply negligence. I am usually against regulations but clearly for certain things we can trust that all humans will be reasonable.
Whilst I can not see a motivation I refuse to accept that parking machines are not advisarial design. Why do they have haf a dozen things that look a bit like tap n pay if they are not trying to make it eaiser for card skimmers.
Some of these are just dumb terminals with the entire state handled on a server. I've seen a bunch of them freeze at once where no UI would respond (but the interactions were buffered) and then when the network hiccup was over they all unfroze and reflected the input.
The self service kiosks are intentionally throttled when scanning barcodes, at a guess to prevent people accidentally scanning the previous/wrong item - I once had some problems with one and a staff member flipped it into supervisor mode at which point they were able to scan at the same rate you'd see at a manned checkout.
I think that's handled by the barcode scanner itself, at least on the ones I've used. The scanner will not recognize the same code immediately, but will immediately pick up a different code.
What's slow is that after each scan it needs to check the weight which means it lets the scales settle for one second before accepting another scan.
Now take that, and add someone in our Polish supermarket chain (Biedronka) having the dumb "insight" to disable "scan multiple" option. Until ~month ago, whenever buying something in larger quantity, I could just press "Scan multiple", tap in the amount, scan the barcode once, and move all the items of the same type to the "already scanned" zone. Now, I have to do it one by one, each time waiting for the scales to settle. Infuriating when you're buying some spice bag or candy and have to scan 12 of them one by one.
I scan as fast as a manned checkout (I did my time in retail). And I can scan my groceries at the speed whilst the people next to me spend most of their time rotating an item to find the barcode.
What can you expect, when people assume as normal shipping the browser alongside the "native" application, and scripting languages using an interpreter are used in production code?
Maybe that ticket machine was coded in MicroPython. /s
Forth is usually interpreted and pretty fast. And, of course, we have very fast Javascript engines these days. Python speed is being worked on, but it's pretty slow, true.
Basically it is because Forth programs are fairly flat and don't go deep into subfunctions. So the interpreter overhead is not that great and the processor spends most of the time running the machine code that underlays the primitives that live at the bottom of the program.
Some Forths are dog slow such as PFE compared to GForth. Meanwhile others running in really slow platforms such as subleq (much faster in muxleq) run really fast for that the VM actually as (almost something slightly better than a 8086).
- TCL/Tk slowish under P3 times, decent enough under P4 with SSE2. AMSN wasn't that bad
back in the day, and with 8.6 the occasional UI locks went away.
- Visual Basic. Yes, it was interpreter, and you used to like it. GUI ran fast, good for small games and management software. The rest... oh, they tried
to create a C64 emulator under VB, it ran many times slower than one created in C. Nowadays, with a P4 with SSE2 and up you could emulate it at decent speeds with TCL/Tk 8.6 since they got some optimized interpreter. IDK about VB6, probably the same case.
But at least we know TCL/Tk got improved on multiprocessing and the like. VB6 was stuck in time.
- TCL can call C code with ease, since the early 90's. Not the case with Electron. And JS really sucks with no standard library. With Electron, the UI can be very taxing, even if they bundle FFMPEG and the like. Tk UI can run on a toaster.
- Yeah, there is C#... but it isn't as snappy and portable TCL/Tk with IronTCL, where it even targets Windows XP. You have JimTCL where it can run on scraps. No Tk, but the language it's close in syntax to TCL, it has networking and TLS support and OFC has damn easy C interops. And if you are a competent programmer, you can see it has some alpha SDL2 bindings. Extend those and you can write a dumb UI with Nuklear or similar in days. Speed? It won't win against other languages on number crunching, but for sure it could be put to drive some machines.
I worked on a startup that was mostly powered by Tcl, the amount of rewriting in C that we had to do between 1999 and 2003, when I left the company among all those dotcom busts, made me no longer pick any language without at least a JIT, for production code.
The founders went on creating OutSystems, with the same concepts but built on top of .NET, they are one of the most successful Portuguese companies to this day, and one of the few VB like development environments for the Web.
Be heartened that your choices are meaningful. The impact of e-waste on ground contamination from landfills in the United States and Europe is negligible, and landfill capacity itself does not approach the level of emergency that planetary warming is for human civilizations.
Bicycling, transit usage, and switching to lower-carbon food sources significantly reduces your CO2 footprint. Your example influences others in your community, though it may not be personally apparent.
Something I recently found out about ARM Cortex M0s, they are small enough and cheap enough that they get used in USB cables to handle protocol negotiation between devices.
Given that the moon lander had a 1Mhz processor and 4kb of ram means we landed on the moon with the compute power of a Vape or USB cable. Wild times indeed.
For the even cheaper e-cigarettes many vendors are producing dedicaded ASICS integrating heater control, pressure sensing, battery management, for as close to free as it gets. It's astonishing.
It's all integrated on a tiny PCB mounted to the back of the microphone.
It also stood out to me how little stuff is in there - there's the uC itself, 3 transistors for heating the flavor canisters, an op-amp for the microphones, but other than that I don't really see anything - no external oscillator, no vrm (though a charger/BMS circuit must be in there somewhere).
I see lots more cost-cutting corners they could take...
Vapes are probably made in enough quantity to warrant custom silicon. Then the mosfets and charge circuit could be on the same die. It could be mounted COB (black blob).
They could probably use a single 'microphone' (pressure sensor) and determine which setting based on a photodiode.
The PCB's could be replaced with a flex PCB which integrates the heating elements (Vegetable Glycerine boils at 290C, whereas Polyimide can do 400C for a short while). Construction of the whole device can then involve putting the PCB inside the injection moulding machine for the cavities, eliminating all assembly steps, joints and potential leaks, and reducing part count
But you need very very little digital logic... The same kind of quantity to do the little power indicator LED's on a battery bank (which are charlieplexed btw), and thats done in the same ASIC that also has the 5V boost power supply (multi-amp gnd isolated n type mosfet) and charge circuitry involving voltage references and laser tuned comparators, and sometimes negotiates USB-C PD as well (needs an internal ROM). And the whole thing needs to be really cheap and with a standby current of uA's.
As long as you aren't interested in multi-Mhz operation, combining the rest at very low cost isn't too tricky.
I love the term “high power” even though we are talking maybe a watt or two when that bad boy’s element is doing its thing!
I mean relatively it absolutely is high power. The quiescent current on that thing has to be microamps…
It’s just funny because to me “high power” is hundreds or thousands of watts. Like an incandescent light bulb or a hair dryer. Or at least it was until I started tinkering with battery powered microcontrollers and doing math to realize exactly how long an 18650 might power a small strip of individually addressable LED’s…
> I love the term “high power” even though we are talking maybe a watt or two when that bad boy’s element is doing its thing!
Your estimate is 1-2 orders of magnitude too low. Small vapes pull a couple amps, as I understand it. Larger vapes can pull over 50-100W. The modded ones into the 200W range. These things can use more power than most CPUs for the brief moment they're on.
The power draw is so high that vape fans compare and review batteries to show which ones can sustain the most power output.
It's an unexpected boon for those of us who use batteries for other things: The vape craze has made more high current batteries available with a lot of user contributed test data.
Vape wattages are more like 15 watts, which is an awful lot for a battery smaller than the tip of your pinkie! I believe the power density (not energy density) of those batteries is market leading.
It has a separate magnetically attached battery / charging unit. I have to charge 5-6 times per "tank" that's attached. The battery side also has a mini-led display showing animations and battery / juice left so it's actually communicating with the tank side. A kit with battery and tank runs me about $25, but the tank alone is about $20. So they add $5 to cover the battery / charging component. It's a vice, but at least with this brand I'm not throwing away batteries weekly.
> How close are we to smart dust I wonder? How small can we make wireless communications?
There's two limiting factors for 'smart dust': power (batteries are the majority weight and volume of this vape), and antennae (minimum size determined by wavelength of carrier wave).
I believe you can fit an NFC module in a 5x5mm package, but that does externalize the power supply.
RFID tags are powered wirelessly, one could imagine powering smaller particles when operating on higher frequencies (RFID is on 13.something MHz requiring relatively large coils). A directional antenna could send a pulsed beam to power a subset of the particles in the area and afterwards receive their signals.
It needs to be in the infrared spectrum at least to be useful for smart dust, otherwise the package size is still dominated by the size of the antenna. Even mm-wave radar is marginal here.
We are going to have to rethink power for smart dust. Like consider that no creature out there is powered by batteries. From the biggest land animal to the smallest microbe it’s all chemistry.
Maybe the smart dust will have to eat microbes and stuff to stay active.
As for communication, we can’t go shoving antennas in them as then they’d be larger than dust. And you can’t use the optical part of the spectrum because of interference with basically everything. You can’t use wavelengths smaller either as you get into UV and high radiation. There is the terahertz radio spectrum [0] between 3mm and 30um that is pretty open and not utilized at all because we haven’t figured out how to make good transmitters. Plus the spectrum isn’t very useful as it isn’t very penetrating and water vapor absorbs it… and it requires lots of power.
Smart dust might have to be more of a distributed computer or something. Or a micro machine that uses chemistry and mechanical magic to do its operations.
Wow: the Sinclair ZX81 launched in the UK in 1981 for around £49.95 as a kit (£50) and £69.95 assembled, making it incredibly cheap, and later in the US as the Timex Sinclair 1000 for $99.95 (kit) or $149.95 (assembled)
This is exactly it. The tech in these sorts of devices is way overpowered for what they are or need simply because it's a lot cheaper to do it that way than it would be to use more appropriately scaled computing power. Either the "more appropriate" components are no longer in production, or they are in production but are now considered somewhat niche and are only produced in volumes that make them considerably more expensive than the more advanced/powerful options.
So you end up with something that could probably be coaxed into running DOOM at playable FPS (if it had enough RAM and a display) relegated to running a humble - and frankly objectionably wasteful (coupled with questionable health outcomes with long term use) - disposable vape.
The Z80 didn't even do 8 bit add. The ALU operates in two 4 bit cycles.
I am now wondering if it's possible to put a ZX81 emulator on one of these microcontrollers. It would need to emulate the Z80 but you've got plenty of spare cycles, and 3x the ROM and RAM of the original, so enough space for a small emulator!
Nowsdays computers misguided us to think that we need to measure RAM in GB and storage in TB. There are a lot of "invisible" applications running on 8bit MCU (not ARM based and more modern than ZX80) and few kB of flash and a bunch of RAM (64 bytes in luxury models). In this context matter more the integrated peripherals like ADC, DAC, PWM, etc that simplify the complexity of board and reduce the total cost.
For my part, I hate anything explicitly labeled "disposable". As the author writes, you're supposed to recycle it, but how many people will do that if it has "disposable" written on it? Even worse, if it was truly disposable they could use a non-rechargeable battery, but because they have to keep up the pretense of it being reusable, they have to include a rechargeable battery with more dodgy chemistry that probably shouldn't end up in a landfill...
Varies widely across country and the type of thing you're recycling. People are so extreme with recycling, it's either "recycle everything!" or "it's a scam, just chuck it all in the garbage"
This sentiment is the case because very often that's where recycling ultimately ends, we just pay someone to move it far away from us so we don't have to see it when it happens.
Until 2018, when they finally stopped accepting it, one of the US largest exports to China was cardboard boxes sent over for "recycling". We burned tons of bunker fuel shipping back the boxes Chinese goods arrived in. The net environmental impact would likely have been less had we just kept the boxes at home.
It's strange to me how often people prefer a widely acknowledged lie than to simply admit the truth.
I always recycle though because the recycle bin in my city is larger than my trash bin, and I don't have enough room in my trash bin sometimes.
I’m relatively sure that electronics are not recycled properly anywhere. At best some of the metals are extracted (hopefully not by mixing the ashes with mercury).
If salvaging 100% of the materials that make up something is the only way to "properly" recycle, we are not recycling anything properly. Some components are not recyclable.
I won't speculate about whether the plastic on the board is recyclable, or ecological to recycle. I don't know. This is what I'm asking.
I can't tell if this is a tongue-in-cheek comment or not, but all of that is shipped off to 3rd party "recyclers" who pinky promise that they will dispose of it properly. Very often those 3rd parties rely on other 3rd parties until the it ends up in a waste pile in a developing country, but with a long enough chain of differed responsibility that nobody can be held accountable.
The fundamental problem with "recycling" is precisely the fact that we just hand it off and don't ask questions about where it ends up, all while feeling great about ourselves afterwards. Bestbuy and Staples are offering accountability laundering so that you don't have to feel bad and in exchange are more likely to become a customer. The 3rd parties working for them do the same thing, but they usually want cash for it.
It varies very widely indeed. In some countries it isn't a scam because it gets burned like Denmark but other than that majority of recycling just means shipping it to a landfill in a poor country that they promise to recycle.
In Hungary it gets sorted out locally. We also recently implemented a bottle return system that (although it's annoying) produces clean stacks of PET, aluminium and glass, all of which are recyclable.
Even with PET, arguably the most recyclable plastic, most of it doesn't go bottle-to-bottle but rather bottle-to-textile. Because most PET "recycling" doesn't close the loop, so it's dubious to even call it recycling. That said, some bottle-to-bottle recycling of PET is done, and this has been getting better.
As long as the heat is used for something (electricity, building heating etc.) there is at least some reuse of parts of it. And if exhaust ist filtered pollution is also limited. Better than just putting it on a garbage dump and forgetting about it.
Depends, it’s hard to make a blanket statement like that. Recycled steel and aluminum for example is absolutely not a scam. But for plastics, I agree that waste incineration is mostly a better solution than recycling (which produces low-quality plastics with some risk of unhealthy contaminants in the few cases that it’s not actually a scam).
This youtube video explains why plastic recycling exists, how it's mostly ineffective and why is it a scam created to normalize one-use plastic. This basically applies to electronics and others. "Why would I reuse or reduce, I can buy, consume an recycle".
Yes, a jest. But essentially you have to directly impact the take home pay off CEOs as that appears to be the only thing they will change their behaviour for.
See "core charges" for many automotive parts to incentivize the return of waste for refurbishing at the higher end and bottle deposits for cans/bottles at the lower end. It's weird how things so common in one part of our society can seem so foreign in others.
Hey, if your entire business plan is to produce actual garbage, maybe you should be held responsible for making sure that garbage has a pathway to proper disposal.
Why recycle things that you can make them cheaper, with less resources and in higher quality from scratch?
(The above is not so much about processors, but about plastics. As long as we are still burning any fossil fuels at all, we are probably better off holding off on recycling and instead burning the plastic for electricity to use ever so slightly less new fossil fuels for power, and instead use the virgin fossil fuels to make new plastics.
Especially considering the extra logistics and quality degradation that recycling entails.
Directly re-using plastic bottles a few times might still be worth it, though.)
We are sitting on 5,970,000,000,000,000,000,000,000 kg ball of matter. We have a giant nuclear furnace in the centre of the solar system that's providing us with energy.
Some resources are still scarce. And a lot of those 6E24 kg is iron and nickel we can never get to. Another big fraction is basically molten stone. And we really should stop putting more carbon into the atmosphere.
Also, if you go for measures like mass processed, the weight of microchips, pcbs, parts is only a tiny fraction of what has to be processed and build in the supply chain.
Agreed that it is smarter to use oil for plastics then to burn it directly.
The world has effectively infinite resources, getting more is usually just a matter of figuring out better extraction techniques or using better energy.
The world only has effectively infinite resources if growth slows down, because exponentials get out of hand surprisingly quickly.
For example at 1% energy growth per year it would only take around 9-10k years before to reach an annual consumption equal to all the energy in the Milky Way galaxy. By "all the energy" I don't just mean consuming all the solar energy from all the stars, and using all the fissionable material in reactors, and fusing everything that can fuse, and burning all the burnable stuff. No, I mean also using all the gravitational potential energy in the galaxy, and somehow turning everything that has mass into energy according to E=mc^2.
From there at 1% annual growth it is only another 2-3k years to using all the energy in the whole observable universe annually.
Population at 1% growth also gets out of hand surprisingly quickly. If we don't get FTL travel then in about 12k years we run out space. That's because in 12k years with no FTL we can only expand into a spherical region of space 12k lightyears in radius. At 1% annual growth from the current population in 12k years the volume of humans would be more than fits in the sphere--and that's assuming we can pack humans so there is no wasted space.
We actually have population growth under 1% now, down to around 0.85%, but that only gets us another 2-3k years.
Sure, like effectively infinite atmospheric carbon sink, effectively infinite Helium, effectively infinite fresh water, effectively infinite trees ... we've treated these things as true, because the World is big and population of humans wasn't so big we've got away with that for a time, now those presumptions are coming to bite us, hard.
Yes, we can work our way out of some holes, maybe all of them. But we have to make things sustainable first, then spend those resources. We're not wizards, deus ex machina only reliably happens in movies.
The biggest risks are that single-use bottles are usually pretty difficult to clean (usually a narrow opening). The second biggest, which is related, is that those single-use bottles usually aren't very rigid and will tend to make small cracks in the surface as the material flexes which makes things even harder to clean. After that, all the cracks that will develop will mean it'll leach out the bad stuff in the plastics far faster than if you had some other kind of water bottle.
If you just opened it and drank the drink in it, there's probably no harm in filling it soon after and using it a few times like that. Using that same disposable bottle for a few months is probably not a good idea.
Here in NY as a cannabis user, one of the brands available that offers vapes (Fernway) offers a recycling program at dispensaries. I get 10% back off my next vape/cart if I return the old one to the recycling dropbox. My dispensary also keeps how many I've returned on file if I return extras, so I keep a 'balance' of disposables returned for the discounts.
It reminds me of how Sussman talked about someday we'd have computers so small and cheap that we'd mix dozens in our concrete and be put throughout our space.
idea for a hobby project for someone better versed in hw than me - create a computer that can at least run basic with the MCU from the disposable vape.. :)
I feel like, pioneers of the past would be rather disappointed with us.
I mean, primarily we're not using this ridiculous power to solve actual problems, but to enslave one another in addiction, mindless consumption and manufactured consent to a lesser life.
Almost 100 years later, now with computer enabled misinformation and agitation campaigns by tech oligarchs, a new fascism is on the rise and Alan Turing would be called an abomination, again.
Why stop there? I think more or less every non-durable product manufacturer (say, lifespan less than 5 years) should be required to take the product back at end of life and dispose of it properly. Trash is an enormous externality. I'm talking about plastic clamshells, container lids, "disposable" storage containers, the lot.
"Why stop there" is often a reason why nothing gets done. Why do small if you can go big right away? Because going big right away is costly (in social cost, in convincing, in how much people need to change behavior, ...) and that prevents people from doing it in the first place because the threshold is high. Apathy is the result. Better to take a small step first, then get used to the measure / the cost, then have a next phase where you do more.
Everybody makes fun of paper straws. Or they made fun of wind power when it was barely 0.1% of energy production. Why not immediately demand 20 years ago that all single use plastic is banned? Or that only wind and solar are allowed? Because the step is too big, it would not be accepted. You need to take one step at a time.
That's even a viable strategy against procrastination. There is this big daunting task. So much to do! Oh my, better scroll a little tiktok first. No, just take a small first step of the task. Very small, no big commitment. Then maybe do some tiktok, but the little first step won't be too much. Result is, you have an immediate sense of accomplishment and actually made progress, maybe even stay hooked with more steps of the ultimately big task.
Yeah, because they suck. Uh, pun not intended. Paper straws get somewhat soggy and feel bad in your mouth. They are inferior to the plastic straws they purport to replace, so people resist them as much as they can.
If you want to actually make a difference with an environmental effort, you need to make something superior. Nobody makes fun of LED light bulbs because (up front cost aside) they are wildly superior to incandescent. People actually like having LED bulbs and seek them out. The same cannot be said, and likely never will be said, of paper straws.
Most paper straws use PFAS, meaning we’re actively composting PFAS in a fantasy effort to feel good about our waste without actually giving anything up
paper straws do not make any sense any way you look at it. Are we saying that we are okay to cut trees to make straws when we could make them out of petroleum ?
Moreover, paper straws are not even recyclable due to water content which makes them soggy. Plastic ones are almost 100% recyclable
Most importantly, unlike plastic straws, they are laced with glue and other chemicals which gets ingested.
Nope, that's a myth. Plastic is essentially unrecyclable. Some types of plastic can be made into "lower" quality types with lots of effort, but there is no circular reuse. The oil and plastic industries want to make you believe that this is all a solved problem, but it very much is not.
In contrast, paper and wood products just rot away at the end of their life, and a new tree grows in their place.
It's not a myth, you can make new items using recycled plastics. Of course, the recycled plastic doesn't have the same properties, but it doesn't mean that it can't be useful to reduce plastic production. Most plastic items do not require pristine materials anyway.
It's the same for paper and cardboard, and it's much better to reuse it as much as possible to avoid cutting a tree. Letting it rot releases the same amount of CO2 than burning it, by the way.
The vast majority of paper products made from farmed trees (because if you're pulping it anyway you can use really fast growing wood), meaning the CO2 you release from burning/composting paper straws is offset by the next tree planted to replace it.
Excess CO2 in the atmosphere is driven by burning fuels that aren't being actively produced via recaptured atmospheric CO2, such as petroleum.
And the fundamental issue with recycling plastic is that the raw ingredients for virgin plastic are basically free as a byproduct of fuel petroleum extraction. If I want octane, hexane, methane, propane, etc. for fuel, I'm also going to be pulling up and separating out ethane, which is a very quick steam crack and catalyzed polymerization away from polyethylene.
I'd argue it's kinda a myth, because I used to believe we could create a perfectly closed loop (you know, like the one the recycling symbol suggests) if only we could cleanly separate the materials (which in my imagination requires consumers to vigilantly separate the waste into dozens of different bins). I'm beginning to think I was wrong.
If 1kg of "recycled" plastics allow to reduce the production of 1kg of pristine plastics, it's already a big win, even if it's downcycling. No need to throw away the baby with the bathwater.
> Are we saying that we are okay to cut trees to make straws when we could make them out of petroleum ?
It’s more okay to make things out of paper than plastic, yes. Plastic waste and microplastics are a huge problem. Trees are a renewable resource.
> Moreover, paper straws are not even recyclable due to water content which makes them soggy. Plastic ones are almost 100% recyclable
Plastic straws are almost never (literally never?) recycled. Paper straws are supposed to be fully biodegradable.
> Most importantly, unlike plastic straws, they are laced with glue and other chemicals which gets ingested.
But yes, this and the usability issue make the other points moot (n.b. leaching harmful chemicals is a concern that also applies to plastic straws and paper cups). The vast majority of existing straws should be replaced with no straw, and most beyond that with reusable straws.
Isn't this a bit like "paper" cups for coffee / water? We switched to these at work a few years ago, and it's an all-round horrible experience.
I swear every other one leaks right away, and those that don't can only be refilled once or twice before they do. So you end up going through like 10 of those a day. I also don't know how "eco-friendly" they actually are, since there's a picture of a dead turtle on them under a text to the effect of "don't throw out in nature".
I guess on the plus-side, our company at least provides ceramic cups to their internal employees. But since it's the employees' responsibility to clean them, not everybody is off the disposable cup train.
My company told everyone to bring their own mug, which they were expected to wash from time to time. Then they give mugs for "thanks for working here" awards once in a while so they can be sure everyone has one. Soap and a sink are provided near the coffee makers.
Paper cups are still provided, but it is intended visitors not people who work in the building.
> I swear every other one leaks right away, and those that don't can only be refilled once or twice before they do. So you end up going through like 10 of those a day
Yeah, if you're using that many, the solution is, and always has been, to get a proper reusable cup (ceramic, glass, whatever).
Right, but this just shows why these policies don't work in practice. People will just use 10 paper cups which are free, rather than cart around a big ceramic one.
Especially in situations where people don't even have an assigned spot in the office anymore, it's not exactly shocking that many will choose the easier route.
> Are we saying that we are okay to cut trees to make straws when we could make them out of petroleum ?
Uhh.. yes? Trees can be grown, just like any agriculture product.
> Plastic ones are almost 100% recyclable
In theory. However that rarely works out in practice, due to the complications of mixing various types of plastic in a single stream of garbage.
> Most importantly, unlike plastic straws, they are laced with glue and other chemicals which gets ingested.
The glue for paper straws will be a biodegradable water-based adhesive. It may be finished with natural wax. And that's it. I think you are intentionally spreading FUD saying glue and chemicals.
That being said, I hate paper straws. I like bamboo straws though.
But usually paper and cardboard that has been in contact with food is not recyclable because it contaminates the batch. That's why pizza boxes also cannot go into the cardboard/paper fraction.
The point of paper fast food boxes is not to recycle them but to have no trash in the end as they just burn or rot, all in a sustainable way. In contrast to plastic.
The frequencies that they claim affect them are disputable but the flickering in some cheap LED lights is real. Badly/cheaply designed electronics can have flicker as bad as 50 Hz if they use half bridge diode rectification only (e.g. that time I was passing through Geneva airport and the Christmas lights flickered in my peripheral vision)
No it's to punish us when it isn't us causing the alleged plastic problem. When the orders went out all the western media took holidays to the far east to film garbage filled rivers in india, the philippines, indonesia. Your disposable plastic straw wasn't ending up there. Your plastic bottle might have been but that's only because of the recycling scam. It should have been burned like the oil it is.
Good that they suck, people might realize that they may as well refuse the straw, drink from the glass and that their life is exactly as comfortable as before the ban.
I don't understand the moaning and bellyaching about straws. Are people that bad at drinking from cups? If you aren't a toddler or bed-ridden patient in a hospital (EDIT: or anyone else with physical conditions that necessitate a straw) you should be able to drink without a straw.
Mouth cancer. I can live a normal life EXCEPT I can't allow liquids to touch my lips. Without straws I have to go through agony just to be minimally hydrated. Paper straws get stuck to my necrotic flesh and tear it off.
There are a variety of conditions that straws are helpful for. A lot of people have health issues that make it difficult to swallow. A lot of people have mouth and lip conditions.
What I don't understand is all the moaning and groaning about the smallest piece of plastic that helps a LOT of disabled people have a semblance of normalcy, when here are much larger plastic fish to fry. We use plastic for basically everything but people have tunnel visioned on a minor piece that actually helps people. It's myopic.
I thought "bed-ridden patient" covered everyone who is physically unable to drink without straws due to disabilities or other conditions. I guess that wasn't clear enough though. My apologies. I've edited my comment now.
> What I don't understand is all the moaning and groaning about the smallest piece of plastic that helps a LOT of disabled people have a semblance of normalcy
You have to admit it's been turned into a culture war point by people who mostly don't need straws. They just need boogeymen to rile up people against environmentalism in general.
You're missing the fact that this sort of infrastructure requires a robust business case. That's why scale is critical.
Recycling bottles and cans has a solid business case. Glass and aluminium are straight forward to recycle at an industrial scale, but would be pointless if they were kept at an artisanal scale.
Any moralistic argument is pointless if you can't put together a coherent business plan. The people you need to work and the energy you need to spend to gather and process whatever you want to process needs to come from somewhere. How many vape pens do you need to recycle per month to support employing a single person? Guilt trips from random people online don't pay that person's rent, do they?
> Everybody makes fun of paper straws.
This is specious reasoning. The core issue are tradeoffs, and what you have to tolerate or abdicate. Paper straws are a red herring because the main criticism was that, at the start, they failed to work as straws. So you were left with an industrial demand to produce a product that failed to work and was still disposable.
If you look at food packaging and containers, you are faced with more thought-provoking tradeoffs. Paper containers don't help preserve food as well as plastic ones. Packaging deteriorates if exposed to any form of moisture, and contaminates food so quickly tk the point you can taste cardboard if you leave them overnight. This leads to shorter shelf life and more food waste. Is food waste not an ecological problem? How do you manage those tradeoffs?
> more or less every non-durable product manufacturer (say, lifespan less than 5 years) should be required to take the product back at end of life and dispose of it properly
Yeah, we had that. Glass milk bottles and coke bottles and bulk goods sold out of barrels by the lb rather than in plastic bags.
But then plastic took off and soon after Big Sugar paid a PR/lobbying firm to run a campaign with a fake Indian crying a single tear and calling every Tom Dick and Harry a “litterbug” and now the pile of garbage is our fault, not the manufacturers.
Nowadays the homeless or other less-than-living-wage earners do that for us. You can see them everywhere in cities all over north america and europe if you pay attention.
As European that is not spread everywhere, while you can get some money back in Germany and Greece, there is none to be had in Portugal.
In Germany, it is such a big issue with people not having other source of income, that there is a culture where and how to leave the bottles around so that they are easier to collect.
My neighborhood recycling occurs on Thursday night, so I take all my empty cans and put them in a clear plastic back and put them next to my trash. I do not think that the garbage people have ever gotten the cans; there is always a homeless person that will walk around and pick up the bag of empties, presumably to redeem them somewhere.
I don’t have an issue with it, if they want to do what I am too lazy to do, more power to them.
Switzerland has something like this for "eWaste", it's called the ARC [1] (Advance Recycling Contribution). For any electronic device you purchase a small tax is collected and used for the recycling and collection of the future waste it will generate.
The collection mandatorily happens in the shops that sell electronic devices, you don't have to return them to the exact store where it was purchased, as long as they sell similar devices they cannot refuse to take it back (without paying anything more). It works pretty well, even if shop owners/workers aren't always pleasant when you return something.
Same here in the Netherlands. But only for larger appliances. Washing machines for instance. Smaller ones you have to be able to send for free but there are too many exceptions. My internet provider switched out the modems and simply said "it's yours now, for free!" Meaning: we don't want to pay for disposing of our inventory. I send it to their free postage address they use for broken items with a brick, since they are charged per kg.
> For any electronic device you purchase a small tax is collected and used for the recycling and collection of the future waste it will generate.
I call bullshit on these initiatives. It is a tax, period. The government collects money and it does... stuff. It is not a deposit, so it doesn't incentivize people to return the thing, and it is too general to de-incentivize particularly bad products like disposable vapes.
The tax can be used on recycling efforts, and it probably is, however you don't need a specific tax for that. These investments can come from other sources of government income: VAT, income tax, tariffs, etc... I don't think people are paying a "presidential private jet tax" and yet, the president has his jet, and hopefully, all government effort for the environment is not just financed by a small, specific tax. Saying a tax is for this or that is little more than a PR move, they could do the same by increasing VAT, and I believe it would work better, but that's unpopular.
> The collection mandatorily happens in the shops that sell electronic devices
We have it in California, just for monitors for some reason, but on Jan 1 a new law covering battery-embedded devices took effect. That new one specifically doesn't tax vapes (???)
You're thinking disposable vapes, but this will apply to quality of life appliances like washing machines as well, right?
Do you want to live in a world where only the rich can afford washing machines?
Incidentally, I don't know what you do, but once in a while I throw (carefully, li-ion batteries) my broken electronics in the trunk and bring them to the local collection center.
Thinking for a moment what "recycling" a washing machine would look like and it's very obvious it would just mean paying a 3rd party to dump it in the 3rd world somewhere to be stripped if at all. Hard to imagine it's not causing more environmental damage by having this policy.
A washing machine has a decent amount of metal in it, that's definitely going to be recycled, as it has value. A policy like this could cause environmental damage, but saying that it's inevitable is just defeatist. In fact the manufacturer is the one with the knowledge to recycle stuff properly as they know what went into it. This is actually a way to work with the market. Any other option, other than just giving up, involves more government intervention.
There's also Stewart Brand style cradle-to-cradle design, where you build in features that allow recycling to be easy, that's really my goal when I say manufacturers should be responsible - change the design
The scrap metal yard near me definitely pays to take washing machines and dryers. There's a lot of steel scrap, some circuit boards, and a motor in there.
Heh. I am in the EU. For washing machines specifically, I get a tiny discount when I buy a new one for having them pick up the old one for recycling. Possibly for freezers too, but for some reason my washers break but the freezer doesn't.
Not all stores do that though, if I buy from one that doesn't I can call my local recycling center and they'll eventually get around to picking up the old appliance from your home.
However, this is not done by the manufacturer or importer, as the OP suggested. There are separate organizations and it's paid for via a tax on new device purchases.
Which means a new washing machine manufacturer doesn't need to worry about having their own recycling infrastructure. And I move that the recycling tax I pay for national level recycling adds less to the price than $NEW_COMPANY building their own, just for their models.
But if you think it through, it's intractable. You need to 2x+ the transportation cost of all products (it will cost more to get them back for multiple reasons, including products not being as neatly packaged and often going from many-to-one transportation to many-to-many). Companies also need to double their specializations and adopt recycling processes that will largely be redundant with other companies; you basically make it impossible for small companies to make complicated products. And are we including food products, the majority of trash? It makes a lot more sense to centralize waste repurposing and benefit from economies of scale.
Waste management is already a very profitable industry. Of course, it's wasteful, just burying stuff, and environmentally harmful. But I'm of the opinion that it will soon be economically viable to start mining landfills for different types of enriched materials, and government subsidies could bridge the gap for things that are of greater public interest to recycle.
I've been working on the software side of the technology needed to do this in my spare time for a couple years, waiting for some hardware advancements.
> You need to 2x+ the transportation cost of all products
As with all economics, it's not a one-way street. A change in conditions causes a change in behavior. Increased costs will cause a change in how products are designed, manufactured, used. If one-time use cost goes through the roof, suddenly all vapes will be multi-use. Plastic bottles will disappear in favor of dispensers and multi-use bottles. Not all of them, but most of.
It's about incentives in a dynamic system, not spot bans in an otherwise static world.
Why would 2x the transportation cost be intractable, but ruining the environment, killing life in the oceans, destroying the basis of our future food production, etc, be tractable?
> You need to 2x+ the transportation cost of all products... Companies also need to double their specializations and adopt recycling processes that will largely be redundant with other companies
I think 3rd parties would spring up to deal with that stuff
Maybe they could use big trucks that just collect all refuse from the curb. And maybe that is something that the city should do so that we don’t have a dozen trucks collecting a dozen different trash cans from every house.
That was tried, and what ultimately occured was disgusting.
The world was full of new computers popping up and every middle class or above person buying new ones like they do with iphones now. Companies started recycling programs, and many immediately went the route of corruption. They would pack up shipping containers full of ewaste, with 40-50% reusable items, and the rest junk, allowing them to skirt the rules. These containers would end up in 3rd world countries, with people standing over a burning pile of ewaste, filtering out reusable metals. There was, at one point, even images of children doing this work. The usable items were sold dirt cheap, with no data erasing, leading to large amounts of data theft, and being able to buy pages of active credit card numbers for a dollar.
We are talking about less critical things now, like vape pens, but its not a far throw for it to instantly become an actually bad idea to let other companies do the recycling. Make the manufacturer deal with it, or even the city/state, via public intake locations (like was mentioned of switzerland in another part of this thread)
As far as i know a large portion of what i described shutdown after it came to light, although i would not be the least bit surprised if it was still happening in some capacity, or even in full under the disguise of something else
The amount of completely useless plastic garbage that we would be sending back east would be mind-numbing. They don’t have anywhere to put that trash either.
So maybe if you make the cost high enough (which is currently just externalized) then they might start disappearing by not being produced in the first place by lack of demand.
People don't buy this because it's crap. They buy it because it's cheap.
If people had to pay the true cost of their decisions up-front, we'd make a lot of different decisions.
That said, I got quite into this stuff a few years back, and determining "true" cost can be harder than it sounds. Externalities, positive or negative, have to be measured against a baseline, and deciding on where that sits is subject to opinion and bias.
All petroleum products come from the fossilized remains of the first trees to evolve lignin, which was tough and durable enough to allow trees to grow taller, but also too tough and durable for any other living things to decompose it. At the time, fallen trees would not rot, and the resulting buildup of wood all over the place caused all sorts of ecological problems. Many of those trees ended up buried deep underground before microbes could evolve the means to eat them, where they became fossilized and turned into coal and petroleum, which we eventually turned into plastic.
Now, that plastic is too tough and durable for any modern microbes to decompose it, and it's starting to build up too. It stands to reason that microbes will eventually evolve the means to digest it and make use of this abundant, under-used energy source. In fact, some already have [1], but it's still early days.
I'm not pro-pollution, but this is far from the first ecological disaster that the global ecosystem can probably adapt to.
Ah, yep. Did conflate coal with oil. I guess my nice analogy doesn't quite hold, but the point stands that plastic originally came from organic matter and is technically biodegradable.
> It stands to reason that microbes will eventually evolve the means to digest it and make use of this abundant, under-used energy source. In fact, some already have [1], but it's still early days.
That’s a hell of a way to kick the can down the road.
I don’t have sea views, but if I wait, sea views are coming.
> Even if the retailer took it back it would still be... trash.
Yes, but making them deal with it would create a massive incentive to either reduce the amount of rubbish they make, or to make it recyclable/processable.
It's an externality because the entity that sold it to you doesn't have to pay the consequences of dealing with the trash. OP said "dispose of it properly," which could mean a lot of things, all of which are better than leaving it on a beach.
Trash disposal (to regulated landfills, not beaches) is enormously inexpensive and increasing the cost of every item through a laborious return program doesn't improve anything.
> Nearly all the plastic humans have made still exists.
And it just doesn't matter. It's a tiny amount of mass / volume.
> The great garbage patch in the Pacific is growing fast.
Ocean plastics are almost entirely a consequence of (particularly Indonesian) fishing net waste, not Western consumer products disposed of in managed landfills. The "great garbage patch" is also very much overstating the scale of the problem; it's a slightly higher plastic density region of ocean.
The main thing about plastic is that it’s made from oil, and oil already exists in the ground. Putting it back into the ground is basically neutral minus the pollution involved in manufacturing.
Geological strata vs shallow landfill sitting above aquifers and subject to near-term erosion.
Disposing of this stuff in deep mines seems like it'd be fine, unfortunately we haven't yet, at a society/economy level, found the discipline to do so. Presumably after a few mya of heat and pressure it'll be indistinguishable from other petrochemicals (which aren't particularly nice to begin with).
It doesn't go "back in the ground" though, does it? It gets scattered all over the ecology. When you take something that was buried deep and scatter it all over the surface - especially when that something is oil - that's usually considered an ecological disaster. Deepwater Horizon, the worst oil spill in history, has had catastrophic effects on the local wildlife, and it is still dwarfed in scale by the amount of plastic annually strewn to the four corners of the Earth.
7 billion kg at the density of water would fit in a cube 200 m on each side.
All the plastic ever produced could be stuffed back into one medium size coal mine. There are thousands of such mines and they are already ecologically disruptive.
It's a large amount when you think about the logistics to move it around the world, but a small amount compared to the total amount of stuff we take out of the earth.
As mentioned in the other thread, ocean plastics have nothing to do with landfill-disposed trash. They're mostly fishing nets waste, and at that, mostly from mismanagement by a handful of poor countries.
I'll assume good faith here and that you were simply unaware of the origins of the so-called great garbage patch, but in future discussions I think it would do your arguments some credence not to bring up ocean plastics in response to discussion about landfills.
They should just be banned outright. In no world is this going to end up in bins 100% of the time. Disposable really means it’s destined for the trash at best, and just simply litter at worst.
Yeah ban is the answer. Trouble is that, as shown in the article, even if they include the charging and refilling bits they can be cheap enough to throw away after use.
Taxing waste is one part of the story but it's actually a really good thing that vaping is cheaper than smoking so this can only go so far before it's counterproductive.
I think the answers lie in stuff like banning sale of pre-filled ones. If you make people buy a separate bottle of nicotine liquid (and you enforce that this is quite a large minimum size, like we already do with tobacco) and fill the device up before they use it, I think they are much more likely to refill it when it's empty and recharge it when it's dead.
Maybe another thing could be restricting points of sale. I bet a lot of the waste comes from drunk people buying them at 10pm in the corner shop near the pub. If you make people plan ahead that might also help.
> Trouble is that, [...], even if they include the charging and refilling bits they can be cheap enough to throw away after use.
Well that is fixable, it's even one of the solutions posited here. Just make them artificially expensive by adding a deposit, which you'll get back when you return it to the shop (instead of throwing it away).
I think disposable vapes are banned in the U.K. (where I think the author is?) or at least they will be soon. But the non-disposable options end up being cheap enough that they can be disposed of when empty.
I think a better thing to do may be to try to embed disposal costs into the price of the original product. That changes prices to hopefully incentivise reuse.
This is true but as a workaround disposable vapes now all include a charging port but are still treated as disposable (so is just another component to be wasted)
For example Germany, while the country is famous for the whole splitting the garbage, I am still waiting after 20 years to see the kitchen oil recycling recipients as we have in Portugal.
As for electronics, I would say no one has anything in place, and human nature is as such that hardly anyone will drive to the next recycling center to deliver a single device that broke down, or call the city hall to collect it.
We should go back to the old days, when electronics were repairable, which naturally companies will lobby against, as that will break down the capitalistic curve of exponential growth in sales.
Those are mandatory in Germany. Recently-ish they started forcing supermarkets and other large retailers to accept small electronics, but in practice I never managed to do it. You pretty much have to argue with the staff every time.
Not sure about electronics as a whole, but I was able to recycle (or at least dispose of properly) an inflated old Dell laptop battery at either a Best Buy or a Home Depot (I'd assume it was the former, but they were next to each other so I don't recall). This is in the US.
Home Depot accepts old batteries. Though it's kind of terrifying because they accept batteries in any condition as long as you put them in individual plastic bags.
And then there's a huge bin of damaged LiPos just chilling by the front door. I'm astonished we don't hear about fires in these bins.
Maybe Italy is more advanced, you can bring eWaste to the municipal center or to leave to the shop where you are buying a new device. On the street they started to place bin for small eWaste like phones, chargers, keyboards, vape.
> For example Germany, while the country is famous for the whole splitting the garbage, I am still waiting after 20 years to see the kitchen oil recycling recipients as we have in Portugal.
Because German environmental policy is about virtue signalling to keep the plebs busy, not solving environmental problems. Nuclear power plants replaced by coal and natural gas, obsession with recycling but nothing done about disposable packaging, car regulations and city design dictated for decades by the car manufacturing lobby, combustion engine limits/bans only when said manufacturers thought they could get on the Tesla gravy train and subsequently rolled back when reality became apparent, it just goes on.
Based on your reply you haven't fully considered context. Smokers don't care about themselves or else they wouldn't smoke. As demonstrated by the article, you can see proof that they also don't care for the environment. What makes you think people who intentionally pay to kill themselves and then throw the waste on the ground instead of trash will ever recycle?
Why though? Bottles/cans are easily recycled and I believe the small reimbursement is easily recovered during the recycling costs.
It's not profitable to recycle small electronic devices otherwise you'd see heaps of shops doing it. It's toxic, hazardous and labour intensive.
100 times the deposit amount would be like $5-10 USD per-device which is insane. I do agree that any retailers should be required to take back empties and dispose of them responsibly.
> It's not profitable to recycle small electronic devices otherwise you'd see heaps of shops doing it. It's toxic, hazardous and labour intensive.
Sounds like they should be banning their sale and/or production then, just like many jurisdictions have been with plastics and other non-recyclable items. These devices are not an essential-to-life item where the waste produced is justifiable, especially when you consider the LiPo batteries, which are a borderline-environmental disaster from the moment the lithium is mined to the day that battery finds its way to a landfill. Why single-use disposable vaping devices exist in the first place is somewhat perplexing given permanent/re-fillable ones are also available, often right beside the disposable ones, and generally offer a significantly lower cost of ownership.
I think waste management should be required to scan the garbage and remove useful items, i.e. recyclables. This would take the burden off consumers and allow more items like this to be intercepted. The technology is there, why not force the corporation to innovative?
It's very profitable to recycle small electronics in some economies where thousands of companies do it (eg India or Shenzhen); in countries where human labour is more expensive, it's untenable
That's a good point. In America we call this type of deposit a "core charge." The "core" is the component you return to the store to get your deposit back.
This is done for components like starter motors, alternators, power steering pumps, batteries, and a variety of other components. The complex components are re-manufactured to like-new specifications and the less complex components are recycled to recover materials. The battery is a probably the only component where the potential ecological impact drives the cost of the deposit.
I never thought about it but it is odd car-components are the only thing most people will experience with a "core" charge. Why don't more industries do something similar? Is it just because car ownership and car repair has been such a core (no pun intended) component of American culture? That a system of recycling has been set up?
I was curious about when and where these core charges started. It looks like it was the result of WW2 and the shortage of steel and other materials forcing both the military and civilian manufacturers to turn to recycling and rebuilding parts out of necessity. After the war, the remanufacturing industry was large enough to stand on its own and the concepts stuck around. Some hazardous items like lead acid batteries have legislation helping to enforce the core charges but the rest seem to be market driven.
You paying a nonzero cost for creating a negative externality is an improvement compared to the status quo, in the context of this economic philosophy of discouraging production of negative externalities by aligning economic incentives.
I feel like the take it back approach, just ends with the retailer/manufacturer throwing it away anyway.
Looking at this device it feels like it shouldn't be hard to have a reusable base with battery and electronics, and a disposable capsule that attaches on top but is replaceable.
The problem is you can’t find any company willing to recycle them. Because of the nicotine content, I’ve heard e-waste recyclers consider them hazardous waste and refuse to touch them.
yeah, e-waste recyclers suck, they love to ship it all to the 3rd world where piles of circuit boards get tossed in an open fire and stirred by kids to reclaim the metals.
Someone imported it, someone's selling it in the stores.
If the price of the "disposable" is, say, £5, make the deposit £50. Suddenly all the vapes will end up back at the retailer.
And make sure retailer has the financial incentive to return the used disposables and that's it.
I'm confident the lawmakers have been bribed to refuse to tackle the problem, otherwise how you can explain minimum price on plastic bags but tolerating toxic landfill fires and staggering waste of lithium (recycling will inevitably br fixed soon).
Well realistically just ban imports. But then people will import them criminally anyway. And to your point; what if Chinese companies assist in evading import bans or customs, as they do now and have done for decades.
Even in the UK, they've added restrictions to it but...surprise, surprise the Turkish/Kurdish corner shops all have a steady supply, with nothing being done about it. As a foreigner living here it's honestly pathetic how disengaged the public here are with things like that. People drive like absolute wankers, too.
I don't want to advertise for the brand but I bought a disposable "looking" vape today where they split the liquid from the core. So the end result is a very small stick but is actually re-usable and they had a re-cycling digital bin.
> Many countries have deposits for single use bottles/cans [...]
Yeah, the deposits for cans are a bit stupid: people already widely recycle aluminum (and scrap metals in general) purely for commercial reasons. No need for extra regulation there like mandatory deposits.
It's much easier to recycle things when everyone participate and bring their trash to a common place.
I've lived in places with no deposits and there is much much much more littering compared to places having deposits on every types of metal/plastic beverage containers
Man. I don't actually know anyone who vapes. I see it in public sometimes and just assumed people refilled them - maybe they do. Seeing him hold some up, seeing all that plastic, metal, electronics, all that Work (Joules) expended, in something that you just dump after a day is nuts. I can't think of anything else like that. Maybe plastic water bottles but they don't have even half the materials or complexity? Maybe I under-estimate how much is put into regular cigarettes or beer & cans.
Refillable vapes used to be the standard around a decade ago, back when a liter of vape base (without nicotine) cost 30€ at max. Disposable vapes pretty much didn't exist. Now the same liter of vape base (still without nicotine) is a "tobacco product" and costs 400€+ due to taxes thanks to decade-long lobbying efforts by big tobacco, turning refillable vapes into a massive niche product due to single-use vapes costing the same or less, without any of the hassle of mixing your own liquids or having to refill them.
Yes, 100ml from the same store I bought a liter from for 40€ in 2015 now cost 56€. There is currently a tax of 0.32€ per ml on liquid, no matter if you're buying the base or the finished product.
I guess it's time to not only make the vaping liquids yourself, but the bases too :P
Quick Googling suggests I'd pay less than 30 euro for a liter of VG. What about for the nicotine concentrate? I'd pay about 20 euros for 100ml of 20mg/ml concentrate.
A little calibrating correction: A vape should last more than a day unless you're a very heavy user. Around three days with a '700 puffs' one maybe, and a week wouldn't be unheard of.
He put a fuse on every individual cell and on the overall unit, so I would say he was reasonably cautious (although he deployed a bunch of high-voltage exposed wires at the end of the video, but we can assume that was just a tech demo).
fuses only help for overcurrent scenarios. if they cell overdischarges due to a mechanical fault, or internally shorts, the fuses wont do anything. any then if it internally shorts at an SOC > like 20-30%, it'll vent and cascade into other cells.
I mean, naturally there's Doom on a vape [0], so as far as I'm concerned, that box is already ticked. Someone should give a good name to the law that every hardware device with a screen has a Doom port.
Our whole current civilization could be construed as advanced alien tech servicing a humongous tribe of moronic apes.
The fact that one fifth of the internet is dedicated to porn just speaks for itself.
Just thinking about all the tech involved, from the capturing of footage using highly sophisticated camera, to the transmission over kilometers of fiber optics, to the stokage into redundant and consistent databases backed by highly optimized hardware and brilliantly engineered file format, to the distribution to your phone device, which is literally a personal computer that fits in your palm.. all of that just to show porn to satisfy your monkey brain.
It seems almost absurd to what length humanity has gone just to satisfy it's primitive needs.
Let's not forget that with both porn AND all the other "junk food" on social media that we waste away on: there are very smart people getting paid a lot of money to make/keep you hooked on them.
IMO this is as much a "we are hopelessly dumb monkeys who just want to satisfy ourselves" as as it is "there's clever monkeys who know and exploit our monkey weaknesses so they can make more money."
I feel like our whacky world is only made possible by fossil fuels. Like why is it profitable to
- build these vapes and sell them for a few dollars?
- tear down an entire house, rebuild a new one from scratch, and sell it?
- ship things all the way across the entire freakin ocean instead of manufacturing them locally?
- mine cryptocurrency?
To me the answer is always fossil fuels. We stumbled on an energy source so dense (at first, seemingly) infinite that it just wildly increased the amount of energy we can use. For most of human history our greatest constraint was energy, then that constraint was just blown the fuck off.
I feel like our whole society is riding a high of cheap energy. We attribute so much progress to things like science and democracy and great thinkers and revolutionaries. But how much of it was really just fossil fuels and nitrogen fixing??
In the past, entire intercontinental trade routes existed just to get food seasoned, so what you’re pointing out isn’t that unusual. The desire for sensual pleasures drives most things (and not only in humans).
It’s hard to know for sure what’s acceptable when it comes to working conditions in China. The information we get is incredibly limited. Most of what makes it through is propaganda.
That said, it wouldn’t surprise me if he does it all day long, 6 days per week.
That’s much less automated than I would have thought. Also the dude vape testing the sticks… I don’t think they are aware they are probably doing more damage than good.
It's not that surprising that a company that sells these awful gadgets to people who don't really care about their own health would behave in such a manner.
This shouldn't be surprising since a vape is a safety critical device. Primarily because the temperature control has to be precise and you have to solve a surprisingly large number of control problems that can arise in real life. For instance, if you overshoot the temperature the amount of toxic by-products can increase sharply. You can also cause parts of the vape to disintegrate, and then aspirate things you really do not want in your lungs.
And this is before we get into dealing with the battery -- which has its own set of risks.
(One of the early sources of funding for MyNewt development was a company that made vapes. Though not disposable ones if I remember correctly).
Also, the MCUs they use are very cheap. They are cheaper than having lots of specialized discrete electronics.
I think you overestimate how much vape companies care about safety. When there is no liquid left, you just vape smoke from burning cotton (it tastes like burned plastic) on half of these devices. There are checks for this, but they are not that good.
I'm sure most don't care more than regulations require them to care (including making tradeoffs in terms of risks of getting caught, and the chance of actual enforcement). But that doesn't change the fact that it is a safety-critical device. It produces something that interfaces directly with sensitive tissues.
I talked to someone who worked on developing vapes and they spent much, if not most, of their engineering on safety-related issues. They may be an outlier. The reason I remember is because I was surprised how dangerous these devices really are if you get things wrong.
As a software engineer with some hardware experience, I would never use a vape. It strikes me as way too risky. Much for the reason you point out: the companies probably don't care more than they are forced to by regulations.
I'd love to see a breakdown of the design and whether or not any of these vapes have any Safety Critical Function considerations, or if they just rely on the mcu for everything and have a ton of single fault risks.
I don't smoke/vape, but I saw some pretty absurd models available recently that really piqued my interest. One had a touchscreen, could run some basic apps, and had wifi/bluetooth support. The other had a d-pad + buttons built in and a few ripoffs of classic games you could play. I bought one of each to start ripping them apart on my work bench and playing with the firmware. Unfortunately I got busy and haven't done much more than look at the internals. They're using some sort of cheap smart watch SoC. It's wild you can get a battery, touchscreen, charging circuit, and a microprocessor for like $12.
As a smoker who transitioned to vaping, I see immense health benefits.
My home country (India), and others (Singapore, others?) have outright banned all electronic cigarettes which is a regulation I hate. I acknowledge that vapes reduce barriers to entry to kids. This is partly solvable in countries with strong governance.
The issue is that when legislation comes in regarding "disposable" vapes - manufacturers skirt around that by making the fluid chamber a removable pod that can be swapped for others, and a USB-C port for charging the device itself.
The issue is that to the end user this is still tangibly the same product - and mostly gets treated in much the same way as the original "disposable" vapes.
You get downvoted because you're implying substances like methamphetamine are common in vapes (as per your linked article), which it obviously is not, and already highly illegal.
The truth is you can mix your own vape juice from just PG, VG and nicotine. Which are completely harmless to eat (except nicotine) and used in food products.
A more rational discussion would be about if inhaling PG and VG is harmful to the lungs, or the additional unregulated stuff you find in flavoring of vape juice.
The reason disposables are so popular in the US is the FDA banned any flavored cartridges, which doesn't include disposables. The immense battery waste is a direct result of a relatively new law.
That doesn't explain why vapes are so rife elsewhere, particularly the UK. They're popular because, as the FT described, they're the ultimate product. Cool, cheap and addictive.
Hardly, they banned fully disposable. You can still by them but now you can swap in a refill cartridge. The price of this refillable one is the same as the original.
Many places apparently don't even sell the refills so it's practically the same.
It was one of those rush laws. They are still for sale, I walk past a "BULK OUTLET FOR ELF-BAR" shop sign when I walk to work.
It's one of those UK laws of "we are doing something!" but not actually do anything. These companies either pay backhand or know how to skirt around the rule. Who's enforcing it?
Surprisingly, Big Tobacco does not really likes vapes because it's not them, and eats in their profit margin. If any, they lobby against vapes and specifically disposable vapes.
YMMV, but it's been the case in France. They were behind the ban on disposable non rechargeable vapes, because kids bought them as a candy. They'd prefer they buy actual cigarettes.
Kids don't have to hide proof of their consumption in their bedroom (well at least until they are hooked enough they can't spend a night without vaping). They buy, consume and throw away before reaching home.
Your point is quite valid, but example is wrong. Those vapes can have a lot of puff in them, they need to be really heavy smoker to smoke out in 1 session.
But reuseable vape has more stuff to manage and hide, and they are more expensive in short run.
Well, since pretty much everything that consumes power today has an MCU in it, simple MCUs are extremely cheap. Volumes are immense. They are also space efficient and it is easy to manufacture PCBAs with them. They also occupy that sweet spot where the need for low power consumption means that you use gate sizes that are fairly largeish -- manufacturing processes and technology that is much, much cheaper than what is used for CPUs for instance.
Same thing with batteries. Ridiculous volume -> low prices. (Laptops and cell phones is why we have usable electric cars. If the EV industry had to drive up the volume all on its own it would have taken much longer to develop that industry)
I think just an oversight—disposables weren't really around at the time the time that the ban happened. 2019, people were mostly smoking Juul and having those crazy custom rigs that they fill with the juice. Disposables really started to take off around 2021 - 2022. Atleast that's what I saw with people around me in NY and California.
Yeah, in my state, with disposable I can get any flavor. But if I want juice or pods, I can only get nasty tobacco flavor. It's an easy choice.
Also, when you do get juice online or from other states, it doesn't hit as hard / the same as whatever they put in the disposables. Someone told me it's because the disposables have vitamin E acetate in them that makes the nicotine get absorbed into your blood quicker.
I think the disposables go around more regulations, which mean the chinese manufacturers can put more addictive stuff in the pods / disposables.
The FDA just hates flavored nicotine products because they're appealing (to both adults and children), and the FDA doesn't want nicotine products to be appealing (because nicotine is perceived to be a public health problem on the scale of tobacco).
Weed disposables are a whole rabbit hole by themselves.
You want to buy a disposable? Ok, here, $20 and you're done.
But if you want to make the oil at home? Ok, $2000 for lights, timers, nutrients, seeds, and a grow tent. Plus another ~$10,000 for a basic short path distillation setup. And honestly to make anything close to what you get in the disposables, you'll need to hire an expert with experience. And you need a lot of space for your new secret lab. For 99.999% of people, it's super not worth it to make at home.
Your home grow prices are high (even setting aside that you can just buy flower instead of the disposable vape). The right range is hundreds of dollars. And I'm sure making good oil costs somewhat more, but you can make crappy dab sludge (wax?) with some scissors, $10 of isopropyl alcohol, and a baking dish ("QWISO"), and that sludge can be loaded in some kinds of reusable vape.
Im talking about making full melt distillate. Crappy dab sludge can't go in a cart. It requires actual distillation to make what they put in the carts. QWISO is a joke.
I promise you, if it was easy, you would see more people making carts. I tried C02, water wash, sifting, heat press, everything you can think of. Its nowhere near the same. And that's just for the bare minimum distillate. We're not even talking about live resin or anything fancy.
You basically need a small factory to get close to the quality of the carts.
And my home grow prices are low. You cant just grow 2 or 4 plants if you want even a small steady supply of full melt wax. Like, 20 plants minimum is more close. And they have to be good. Living soil, aeroponic, whatever you want.
And that's if you can get actually good yield. I've seen people get such bad yield that they turn 1 pound of flower into less than 3 grams of wax. That's why you need an expert. Even putting together a successful distillation operation is no joke. Besides chemistry knowledge, you need lots of "industrial equipment" knowledge. We're not talking about using a heat press or a curling iron to make "dabs". We're talking about making the real shit.
To be honest 10k is in the range of the cheapest alibaba eqipment. Most commercial outfits, even smaller ones, use much more expensive equipment.
This is why people prefer to just buy it from the store for $20.
Did that in Australia - the problem is even worse now. Disposable vapes were a market response to banning and restricting pod vapes (where you can keep the base and just swap out the pod).
Nicotine policy and policing has been a clusterf - not only are there wasteful disposable vapes everywhere, but a thriving black market that has lead to firebombings and murders.
Sounds like they didnt ban it properly. There aren't really nicotine junkies like heroin. So I suspect ban nicotine and slowly everyone stops using nicotine sources.
Everyone I know who vapes nicotine is a junkie about it.
In fact, nicotine habits can be harder to kick than heroin. I know plenty of people who have tried to kick nicotine many times and cannot stay off of it.
Anyway, it's moot, because outright banning tobacco is insane.
Kind of odd because the withdrawal is, physically, less taxing than caffeine (never mind opiates...), and yet the brain rewiring to chase the hit is somehow far more pernicious.
New Zealand was making really good progress on getting down the smoking rate with a variety of measures (primarily ramping the tax).
The current government has started rolling back decades of progress, and SURPRISE, they have close ties to the tobacco industry including MPs who worked for tobacco companies.
As mentioned upthread, Australia has been running a similar strategy of trying to tax smoking out of existence and all that's happened is they've rediscovered the Laffer curve as well as pushing otherwise law-abiding citizens towards illegal tobacco.
There's a limit to how much sin tax people are prepared to put up with. Either its legal to consume or it's not, and vapes are far less objectionable to be near by than traditional cigarettes. It bemuses me that Aus, NZ, Singapore etc have gone down the path of trying to ban vape usage when the alternative is far worse.
NZ isn’t trying to ban it, not at all. Winston Peters loves tobacco. This government loves the tobacco industry, to the extent that it has them helping with legislation (industry documents mysteriously getting used to write policy). Casey Costello is a corrupt joke.
Having just spent a bit of time travelling, I think vapes are worse to be near than cigarettes or cigars.
Walking down busy street in the UK is just so gross. The sickly sweet strawberry, cinnamon etc. I’d prefer tobacco smoke.
And at least there was some etiquette around tobacco smoking. You don’t often encounter it inside, in planes, trains, theatres, malls etc. all those were going on this month.
They are straight up banned in Australia but you often see them chucked in the gutters and rivers. Only seems like they started raiding the stores in the last few months.
The vape ban in Australia is utterly stupid though. All vapes are banned, not just disposables, and guess what's easier to discretely sell to kids from a newsagency.
Doesn't seem to have stopped kids getting their vapes yet I need to import my cannabis vape via the black market.
They're not all banned, you just need a prescription to get one which realistically should've been implemented day 0.
Eventually it'll prove very impactful with the youth, it'll reduce the number of users and make it more cost prohibitive to be so prolific as it is right now.
Why do we need to ban these? I'm not trying to be contrarian, but why do some people appear to be for banning tobacco but not alcohol? I don't claim to have all the answers or even strong opinions, but if your going to ban one recreational drug with negative externalities you should ban them all. I'd much rather hear people's opinions then ask AI.
> If alcohol came inside of little battery powered computers, we should ban those too.
I too am agnostic but do not understand this reasoning. BTW let me get severely downvoted by saying that if alcohol prohibition came up for a vote I'd vote yes in a heartbeat.
It reduced the amount of people who drank and it increased health. It increased safety for women and children and reduced violent crime on the streets and in the home. It reduced alcohol related diseases and death. People missed less work. Like with passive smoking, a ban on alcohol positively affects non-drinkers too.
It was the organised crime side effects and societal unpopularity which lead to it's "failure". Alcohol prohibition continues to work in some countries today but I wouldn't want to live there.
Ultimately it's a bio-ethics and freedom issue, issues that continue to raise their head from time to time here and there, e.g. coronavirus responses.
Control of vaping could also be classed in this category.
It doesn't stop addicts from craving and it doesn't curb the appeal of the product. People who think tobacco/nicotine bans would work are people who think they don't have any positive effect associated with them.
People don't smoke because the evil cigarette companies tricked them and now they are addicted. It's a drug, it feels good to do it.
A tobacco/nicotine ban will end up exactly like aby other recreational drug prohibition.
> People don't smoke because the evil cigarette companies tricked them and now they are addicted.
Isn't this exactly what happens, and why cigarette advertising is banned in many countries, and why marketing child-friendly tobacco products is commonly restricted, and why there are even regulations/guidelines around portrayal of smoking on TV in some regions?
People have been stealing and killing other people as many years if not longer. That doesn't mean you cannot do a bit of legislation and obtain some positive results against that.
I think not banning the cigarette and non reusable vape is the wrong solution but banning smoking in lots of public spaces has improved the situation, maybe not to curb consumption but at least non smokers can breath a little. I wish it would also applies to outdoors cafe/restaurant terraces too as smokers effectively ban to non smokers by spreading their poison around them. They could walk away for a couple of minutes to get their hit but they don't on purpose. There should be a radius around an outdoor terrace where smoking is effectively prohibited.
Outdoor cafes/restaurant terraces that allow smoking effectively are marketing to smokers. Smokers generally stay longer (therefore may order more), and basically are giving themselves dopamine at this venue, therefore creating associations to possibly draw them back in the future. These places could just not provide ashtrays and could just not allow smoking, but they do allow it, because it's good for business.
If you really don't like it, you could just not visit these establishments. To these businesses, the benefit of allowing smoking doesn't outweigh the negatives (some people not liking it). Obviously you don't not like it enough to just not go there. Not a smoker, but i've never understood this puritanical attitude towards smoking and only smoking. Yeah, it's not great to breathe in an enclosed space, but in an outdoor space, I don't see how much worse it is than car exhaust, air quality, etc.
> If you really don't like it, you could just not visit these establishments.
Well I go inside, because there are no establishment in my area that ban smoking in their terrace.
> it's not great to breathe in an enclosed space, but in an outdoor space,
It is exactly the same unless there is significant wind is in a direction that push the fumes away. Obviously it depends on how tightly the tables are put as well but it is just super annoying. I have a friend whose eyes turn red immediately when exposed to tobacco product fumes and he suffers way more than I do.
Also it ruins the taste of food and drinks.
> I don't see how much worse it is than car exhaust, air quality
Usually those that are close to traffic and car exhaust are less popular than those that are less directly Unless you live in a complete smog, cigarettes/vapes fumes that goes directly to your face are always more annoying.
You would have compared to sweaty and smelly bodies in a dance club you would have got a point.
> People have been stealing and killing other people as many years if not longer. That doesn't mean you cannot do a bit of legislation and obtain some positive results against that.
This thread is/was about prohibition of smoking. I was making the point that tobacco/nicotine is a drug that has positive psychoactive effects, that's why people use it.
People seem to have this misconception that smoking is just some thing tobacco companies tricked people into doing and so prohibition would work. It wouldn't. We can already see in places where the prices of cigarettes create a nearly de-facto ban that it creates black markets and we know that black markets create crime.
Hence legalizing where you can smoke vs prohibition of the sale. There will always be some private place hosting semi-public parties where people can smoke but if you enforce non smoking in public areas that forces everyone to reduce a bit their consumption, makes it more an antisocial thing and allow those that don't like being exposed to it.
I was suprised to see recently that ban on smoking is still not enforced in some bars/club playing music in Germany. It was like a blast from the past to me after living in countries that implemented that strict ban much more seriously for years.
Singapore and AFAIK Thailand banned vapes altogether. And it seems to be actually enforced.
They have completely different grounds for it but still, there's already some movement in this space.
Not. I've seen young teenagers vape in Thailand, that's how enforced it is. They only catch foreigners from whom they can extract thousand-dollar bribes.
They do seem to be banned in an around 10 states at this point though there is some sort of existing stock law or something so if you ask them you still seem to be able to buy them. They don’t seem to be on display anymore though.
I've just started a Salvage Pile in my workshop. Laser printer with fax modem was the first for excision and harvest. I could feel the addiction take hold before the last of the plastic shell was tossed into the refuse bin. The stepper motors alone!
I have a huge old microwave on the blocks next. After that a series of small odd ball electronic toys and a few early LED bulbs. If I ever come across a vape, I'm sure it'll make its way on to the shelf.
With regards to the microwave, here’s a token “please safely discharge and double check the cap” comment!
With regards to vapes, just look on the ground near a sidewalk. I find like 3 or 4 big depleted vapes a day in a US urban area. Closer to 15 or 20 in greater London in the UK.
As a second regards the microwave, depending on the age, please be extremely careful about the magnetron the insulators on which could contain beryllium oxide, which can kill you.
There are a lot of fun parts inside microwaves (a personal favorite is the high-torque-low-speed-line-voltage motor, which I use to make creepy Halloween decorations) but the caps, transformer, and magnetron are all useful for somewhat... more dangerous... pursuits.
the insulators on which could contain beryllium oxide
As far as I can tell, this is an urban legend. No consumer microwave oven has ever used beryllium in its magnetron insulators. Military radar ones, yes (and likely where the legend started.) Some specialist test equipment and RF transmitters too, and they all contain prominent warnings of it. Besides its toxicity, it's far more expensive than regular alumina.
That's my understanding as well, but I still wouldn't disassemble a 1960s microwave without protection (I have assisted in the dismantling of a couple microwave communications devices which did contain BeO and were also very well-labeled as such). Anything from the 80s on at least is almost certainly aluminum.
Sort of. "Single use disposables" were banned, but the companies switched immediately to a two-part unit which, AFAICT, is still used and thrown away in exactly the same fashion.
Sample size of 1, but I have a friend who does buy the refills and charges the original unit. Every shop that sells the combination units also seems to sell the refills (at least around here).
In the 70s, the Polaroid SX-70 camera included a disposable battery in every film pack. After 10 shots, you threw away both it and the plastic film case with its large metal spring mechanism. When the film production stopped in the late 00s, you could use 600 film designed for other polaroid bodies reloaded into a 779 native SX70 cartridge, because the battery would last much longer than the initial 10 shots.
I have used these disposable vapes before, and it saddens me that so much tech (including those batteries!) are just thrown away. Like what ever happened to reducing e-waste.
I still think the next evolution of these vapes is for a Tamagotchi-esque device to get built into them and to have the pet grow when you inhale through it. You're already walking around with enough tech - why not gamify it more?
Currently working on a method to recycle / repurpose the li-ion cells obtained from the disposable vapes, trying to scale up the recycling effort by releasing products to fund the manpower required to breakdown and sort the vape components . Getting close to releasing the first 100 demo models of the product for stress testing in the wild. Currently based in the greater Seattle area and here is a link to my site if anyone wanted to know more:
https://2ndchancemnd.com/
It feels like we’ve turned every physical object into a distributed system with firmware updates, a network stack, and a failure mode that requires rebooting your house. All that compute just to do the same job the purely mechanical version did for decades, except now it can also crash.
It being activated by microphones makes me think you could add speakers to this tiny format and make a tiny digital instrument that's influenced by blow intensity etc.
That is a lot! But that's also an expensive vape, with way more tech than cheap ones. Here you can get one for ~10 Euro, and they are NOT rechargeable or anything.
I can't believe these are legal, especially in countries that supposedly care a lot about the environment and where people are even quite annoying about, for example, only using the "Eco Mode" on household appliances (also known as the "won't clean your dishes" mode, "won't clean your clothes properly" mode...)
I remember the good old days when a "vape" was just a sturdy housing for a rechargable battery, some heating wire, cotton and juice. The power was determined by the resistance of the coils you built. Those things would last forever.
It's wild to think about the e-waste implications of this. We are effectively throwing away a basic smartphone's worth of complexity and lithium every week.
I just dont understand disposable vape. It's very easy to convert one into "reuseable": Add a charging port, a cheap li-po charger ic, some mechanism to let user refill the boiler. Disposeable vape should have not existed at first place
Some of them (actually most of them where I live) are rechargeable, they're not refillable and you can't change the atomizer (wick and coil). And the most expensive part of the vape is the tax on nicotine liquid, so there is little sense to hassle with wicks and refills.
Given the environmental impact of disposable vapes (the littering was awful), some places have already implemented bans. The UK's ban came into force June 2025.
> Disposable vape should have not existed at first place
When herbal vapes for cannabis came in around 5-10 years ago, it was the catalyst that started all this. Pax are the main manufacturer of these disposable vapes and one of the first on the scene to push THC following with nicotine. These were originally expensive, bulky and seen as an luxury item. I bought one, an DeVinci Ascent, I loved it.
I used it to hide that I was smoking cannabis from my parents and all the opportunities to walk the families dog and get high were wasted by playing CS:S and getting high. Teenage-hood for you.
Coil driven vapes are a different ball-game. Require actual human intervention and know-how. They are refillable in a sensible way, coils need replacing and I've seen some very cool rigs.
A USB port is pointless if you know that the user isn't going to refill the cart. If you can produce the device cheaply and not get taxed for the environmental waste. Add the R&D costs, additional safety, additional materials for the tank. What do you do with the now empty toxic tank? There are additional costs for stocking vape shops to refill the liquid. The latter is a more sustainable business option than the former.
They know the playbook. They would much prefer for you to be out with mates, stop off at a newsagents, pick up some chemical brain-rotting Dragon Soup and grab an elf-bar. Act like a twat outside of the venue and then throw it on the ground. Anything to do with vaping is foul-play. The Alcohol biz is tightly knitted with the vape/smoking biz.
Disposable also gives you plausible deniability. They get in trouble, close up shop. Relabel their brand and start again.
This is a really interesting topic but not a thorough article imo. I don't really understand how the 6 flavours come about, what the sucking positions the author mentions are etc. Would love it if you go into more detail. Also, now I have a very strong urge to buy one of these things and take it apart. Inspirational!
That's such an interesting design choice. Very curious why they went with the mic approach. maybe because it was already there to sense sucking anyway.
The “interesting design choices” in these things knows no bounds… I recently came across one that had a glitter snow globe built into the side of it. Well, more of a snow hemisphere, but still so absurd.
A few years ago I saw a vape with a full display that played a pac man clone aside from the state and settings, and now I have a drawer of random vape screens and components that I swear i'm going to use one of these years.
It feels so odd to think that the human which is self poisoning with an electronic device that will be neglectedly thrown on public area is not that different from the one who would diligently bring it to a trash, even curiosity didn't jump in to enjoy analysis of the device.
After-school tech club idea: instead of just handing kids an Arduino, tell them to get their purloined vapes out of their pockets and hack 'em till you get JTAG or semixosting working.
Doesn't look like SMD was great. This looks like lowest cost has gone back to .. rows of people with a soldering iron patching the cheapest possible flow process.
Alternate take: Is this really "a ridiculous amount of tech", or just "how things are today"?
At one point in history aluminum and other alloys were considered pretty cutting edge. As was in-house electricity and plumbing. Now, those things are just everyday stuff that gets no special regard.
When you can build disposable computers at scale for pennies, it might not be "tech" anymore in the sense of cutting edge things, and instead it's just "an average Tuesday".
Both are true. Today we get a ridiculous amount of tech for <$1.
ESP32 has a compute power of a PC from the early '90s (it can run Quake!), in addition to having wireless connectivity you couldn't even buy back then.
I'm amazed there isn't more of an outcry against these things. I'm not an environmental activist, but even I'd feel wrong just throwing something like that away.
Put it this way, from engineering and technology perpective vape is equivalent to generalization of smoking tools (cigarette, pipe, etc). Naturally it's a very complex as a system and no small feat because you are going to generalize relativity and AI, for examples general relativity and AGI, respectively.
The ESP32 (with Bluetooth and WiFi) is like $5 on AMZN. Which is probably sub-$2 in any meaningful quantity in Shenzhen. We've been living, at least until the tariffs, in a StarTrek like world where whatever we want is available from Shenzhen for a ridiculously low price (which in many respects is better than "free" because "free" brings with it its own humongous problems).
It upsets me that disposable vapes are not more prohibited. Where I live I often find vapes discarded in parks and other areas where they can be a fire hazard.
These products are targeted towards high school teens and middle schoolers, carry a number of serious health risks, and anyone involved in making them can rot in hell.
The only realistic risk so far is addiction and a nicotine addiction doesn’t ruin lives. Other than that it’s marginally bad for the heart and so far atleast not carcinogenic.
> Nicotine in tobacco can form carcinogenic tobacco-specific nitrosamines through a nitrosation reaction. This occurs mostly in the curing and processing of tobacco. However, nicotine in the mouth and stomach can react to form N-nitrosonornicotine, a known type 1 carcinogen, suggesting that consumption of non-tobacco forms of nicotine may still play a role in carcinogenesis
The dose in urine is 1-3% of that of cigarette smokers so it is a significant, order of magnitude decrease in risk based on the paper another GP has posted below. In the mouth the levels also seem to be an order of magnitude lower than cigarette smokers (though similar in a majority of cases). Those are relatively acceptable risks for a vice I would think.
Nicotine gets metabolised into several compounds within the human body which are carcinogenic, even if pure nicotine in itself isn't.
Cancer risk is more complex than just carcinogens. Nicotine is known to promote the growth of existing cancer cells, and in multiple ways.
A big thing with cancer that not many people are aware of is that we all have cancer cells, and get new cancer cells all the time — but that the human immune system is normally effective at detecting and killing them before they have multiplied too much. Old cancer mutations can lay dormant or kept in check for many years, but if promoted and/or the immune system gets stressed or suppressed, they'd grow and you'd "get cancer".
Different types of E-juice also contain additives for flavour, and we still don't yet know the long-term effects of some of those — when ingested as vape — which is a different to being swallowed. And by long-term, I mean 20 years or more, which in some cases is the time a cancer cell can take from formation to detectable tumour.
As stated by a sibling comment, at least the carcinogenicity part isn't true. Unfortunately, even nicotine gum should be carcinogenic (and is of course not intended to be used for consumption besides of alleviating withdrawal effects).
You cannot say "better" in this context without an almost endless degree of quantification that could fill textbooks. By what metric? Public health? Cost effectiveness? Environmental impact? How do we measure these things? I assume you're arguing a health perspective (which, at this point all we can say is probably better), but in the context of TFA "better" is more likely to be interpreted in an environmental context, of which I haven't really been convinced either way.
Is this actually disposable if it has the rechargeable battery and display? Or is it maybe like a lighter that technically can be refilled but nobody ever does?
It's so curious why these things are addictive. Before I tried a vape (it was called an e-cigarette back then) I thought the addictive thing about cigarettes is the nicotine. That's part of it, but a huge part (possibly even bigger) is just the sensation of sucking in smoke/vapour from a little stick and exhaling it. Is it similar to sucking on a mother's teat or something? It really seems to satisfy in a way nothing else does.
In the UK truly disposable vapes are banned, thankfully, but I do wonder if it's now just "technically refillable" ones that people use one time. They should be taxed to the eyeballs to encourage reuse if so.
It's both disposable and rechargeable. It has to be rechargeable as the battery doesn't contain enough capacity for the total amount of juice that's stored in them. E.g. a vape could have 10k puffs of juice, but the battery only lasts for ~2k of puffs so you have to recharge it about 5 times until the juice runs out. But once it runs out, there's no way to refill the juice so they get discarded.
I remember when these USB-C vapes originally came out, we were joking that vapes got USB-C before the iPhone did.
Edit: You were complaining about 'environmental' HN users, but now you've edited your comment. I guess you read the article and were convinced, that's great :)
The water from sewage might end up there after it's extracted and sanitized, but all the solids have to be disposed of too. Those solids, plus the leftover chemicals used to extract and sanitize the water, go to landfill.
It's not rediculous if you look at this through a modern lens. In reality this tech is cheap. Trying to keep it around is hoarder mentality. You are stockpiling garbage which can be cheaply replaced.
To put into context: this is 3x the ROM/RAM of the ZX81 home computer of the early 1980s. The ARM M0 processor does full 32-bit multiplication in hardware, versus the Z80 that doesn't even offer an 8-bit multiply instruction. If we look at some BASIC code doing soft-float computation, as was most common at the time, the execution speed is about 3 orders of magnitude faster, while the cost of the processor is 2 - 3 orders of magnitudes less. What an amazing time we live in!
Now that it is a pity that when people talk about saving the planet everyone keeps rushing to dispoable electronics, what serves me to go by bycicle to work, be vegetarian, recicle my garbage, if everyone is dumping tablets, phones and magnificient thin laptops into the ground, and vapes of course.
Yet, I still need to wait about 1 second (!) after each key press when buying a parking ticket and the machine wants me to enter my license plate number. The latency is so huge I initially thought the machine was broken. I guess it’s not the chip problem but terrible programming due to developers thinking they don’t need to care about performance because their chip runs in megahertz.
"Key presses are 15x slower than they should be" gets labelled P5 low priority bug report, whereas "New AI integration to predict lot income" is P0 must-fix because on Tuesday a sales guy told a potential customer that it'd be in the next version and apparently the lead looked interested so we're doing it.
Most software sucks, even when people have to chose using it. Everything is buggy and slow, people are just used to software being bad.
When it comes to priorities about what to write and what to focus on, the buck stops at management and leadership. When it comes to the actual quality of the software written, the buck stops at the developer. Blame can be shared.
I'm at much lower risk than the imagined target of the "Fuck Off Fund" concept for things like inappropriate sexual contact or coercive control, but I find it really does lift a weight off you to know that actually I don't have to figure out whether I can say Fuck Off. The answer to that is always "Yes" which leaves only the question of whether I should say that. Sometimes I do.
And you know, on zero occasions so far have I been fired as a consequence of telling management to fuck off. But also, I had to think hard about that because, thanks to the fund, I had never worried about it. I've been fired (well, given garden leave, same thing) but I have no reason to think it's connected to telling anybody to fuck off.
No. The quality is not prioritized by management. A dev that fails to ship a feature because they were trying to improve "quality" gets fired.
We have no labor power because morons spent the good times insisting that we don't need a professional organization to solve the obvious collective action problem.
When the device is new this is an absurd amount of time to wait. As the device degrades over 10, 20 years, that programming will keep it working the same. Awful the entire time, yes, but the same as the day it was new.
At Kroger-brand gas stations near me, I get to interact with the buttons on gas pumps to select options and enter a loyalty ID.
Those buttons have visible feedback on a screen, and also audible feedback consisting of a loud beep. And there's always delays between button press and feedback.
Some combination of debounce and wear might explain that easily enough.
Except... the delay between pushing a button and getting feedback is variable by seemingly-random amounts. The delay also consistently increases if a person on the other side of the pump island is also pushing buttons to do their own thing.
It's maddening. Push button, wait indeterminate time for beep, and repeat for something like 12 or 13 button presses -- and wait longer if someone else is also using the machine.
I can't rationally explain any of that variability with debounce.
Over WiFi?
Or perhaps the original programmers skipped the class on concurrency 25 years ago, and nobody has subsequently bothered to pay anyone to update that part of the software.
The right person is the other riders on the train - but the hard part is to frame this such that they join you on a march to the the agency that owns that machines to complain. I wish you the best of luck figuring out how to do that (I don't know how to do it - and if I did there are might higher priority things that need to be fixed).
If you keep your finger on the touchscreen for just long enough, it helpfully repeats the keystroke while you're entering a license plate.
Given the inevitable hardware issues, this means that what should be a single tap frequently becomes a burst of identical characters.
The programmers who worked on this probably would've liked to be game developers instead.
Gently forcing the individual to choose sapient or insentient.
My underpowered cash register that hadn't been updated in a decade could run POS on top of Windows 7 Embedded POSReady buttery smooth.
Occasionally they would start performing poorly, and it was always a network issue.
We can make crazy latency ourselves just fine, no space transmission necessary
Just one recent example: few months ago, I replaced a Bosch dishwasher with the latest version of the same model. Now, when I press the start button to initiate the cycle, it takes over 3 seconds for it to register! Like, what is going on in that 3 seconds?
How was it possible that even 'kind of good' developers like me were able todo much more with much less back in the 90s? My boss would be like, "Here's this new hardware thingy and the manual. Now figure out how to do the impossible by Monday." Was it because we had bigger teams, more focus, fewer dependencies?
I suspect that a lot of it is caused by shoving Android onto underpowered devices because it is cheap and seems like an easy button. But I don't know for sure, that's just an impression. I have no numbers.
Could there be an opportunity here, for a specialized kiosk OS or something like that?
https://skeptics.stackexchange.com/questions/52448/were-face...
Yes, but still probably a million times easier for both the building management and the software vendor to have a SaaS for that, than having to buy hardware to put somewhere in the building (with redundant power, cooling, etc.), and have someone deploy, install, manage, update, etc. all of that.
You don't need any of that. You need one more box in the electrical closet and one password protected wifi for all the crap in the building (the actual door locks and the like) to connect to.
The one at my previous office even had centralized management through an RS232 connection to a PC. No internet and related downtime at all. And I don't recall us ever being locked out because of that.
The doors the system controls don't have any of this. Hell, the whole building doesn't have any of this. And it definitely doesn't have redundant internet connections to the cloud-based control plane.
This is fear-mongering when a passive PC running a container image on boot will suffice plenty. For updates a script that runs on boot and at regular intervals that pulls down the latest image with a 30s timeout if it can't reach the server.
https://eprint.iacr.org/2002/160.pdf
Both an embedded microcontroller and a PC have storage. The reason you can power-cycle a microcontroller at will is because that storage is read-only and only a specific portion dedicated to state is writable (and the device can be reset if that ever gets corrupted).
Use a buildroot/yocto image on the PC with read-only partitions and a separate state partition that the system can rebuild on boot if it gets corrupted and you'll have something that can be power-cycled with no issues. Network hardware is internally often Linux-based and manages to do fine for exactly this reason.
Assuming the internet connection and AWS work of course. Which they won’t always, then oops.
A card access system requires zero cooling, it’s a DC power supply or AC transformer and a microcontroller that fits in a small unvented metal enclosure. It requires no management other than activating and deactivating badges.
There is no reason to have any of the lock and unlock functionality tied to the cloud, it’s just shitty engineering by a company who wants to extract rent from their customers.
At the doors, there might be keycards, biometrics and PINs (oh my!) happening.
But there's usually just not much going on, centrally. It doesn't take much to keep track of an index of IDs and the classes of things those IDs are allowed to access.
It started crashing during backups.
The solution was to stick a fan on it. :( This is literally a box _designed to not need a fan_. And yet. It now has a fan and has been stable for months. And it's not even in a closet - it's wall-mounted with lots of available air around it.
Actually in almost all products meant for real companies doing real work, this is an explicit design requirement.
Every cash register runs off of a computer that sits in a tiny metal oven with no cooling and is expected to run 24/7 without fail.
The difference between a tech gadget and a real world, real purpose appliance.
Any access control system that fails in the event that it loses internet connectivity is poorly designed.
> Yes, but still probably a million times easier for both the building management and the software vendor to have a SaaS for that, than having to buy hardware to put somewhere in the building (with redundant power, cooling, etc.)
A isolated building somewhere in the middle of the jungle dependent for its operation on some American data-center hundreds of miles away is simply negligence. I am usually against regulations but clearly for certain things we can trust that all humans will be reasonable.
Besides the fact that scanning a barcode seems beyond much of the general population, they do it so sloooow.
What's slow is that after each scan it needs to check the weight which means it lets the scales settle for one second before accepting another scan.
I scan as fast as a manned checkout (I did my time in retail). And I can scan my groceries at the speed whilst the people next to me spend most of their time rotating an item to find the barcode.
Maybe that ticket machine was coded in MicroPython. /s
Forth is usually interpreted and pretty fast. And, of course, we have very fast Javascript engines these days. Python speed is being worked on, but it's pretty slow, true.
* https://www.forth.org/fd/FD-V06N5.pdf
Basically it is because Forth programs are fairly flat and don't go deep into subfunctions. So the interpreter overhead is not that great and the processor spends most of the time running the machine code that underlays the primitives that live at the bottom of the program.
It's a list of jumps to functions.
- Visual Basic. Yes, it was interpreter, and you used to like it. GUI ran fast, good for small games and management software. The rest... oh, they tried to create a C64 emulator under VB, it ran many times slower than one created in C. Nowadays, with a P4 with SSE2 and up you could emulate it at decent speeds with TCL/Tk 8.6 since they got some optimized interpreter. IDK about VB6, probably the same case. But at least we know TCL/Tk got improved on multiprocessing and the like. VB6 was stuck in time.
- TCL can call C code with ease, since the early 90's. Not the case with Electron. And JS really sucks with no standard library. With Electron, the UI can be very taxing, even if they bundle FFMPEG and the like. Tk UI can run on a toaster.
- Yeah, there is C#... but it isn't as snappy and portable TCL/Tk with IronTCL, where it even targets Windows XP. You have JimTCL where it can run on scraps. No Tk, but the language it's close in syntax to TCL, it has networking and TLS support and OFC has damn easy C interops. And if you are a competent programmer, you can see it has some alpha SDL2 bindings. Extend those and you can write a dumb UI with Nuklear or similar in days. Speed? It won't win against other languages on number crunching, but for sure it could be put to drive some machines.
The founders went on creating OutSystems, with the same concepts but built on top of .NET, they are one of the most successful Portuguese companies to this day, and one of the few VB like development environments for the Web.
Bicycling, transit usage, and switching to lower-carbon food sources significantly reduces your CO2 footprint. Your example influences others in your community, though it may not be personally apparent.
Given that the moon lander had a 1Mhz processor and 4kb of ram means we landed on the moon with the compute power of a Vape or USB cable. Wild times indeed.
It's all integrated on a tiny PCB mounted to the back of the microphone.
Vapes are probably made in enough quantity to warrant custom silicon. Then the mosfets and charge circuit could be on the same die. It could be mounted COB (black blob).
They could probably use a single 'microphone' (pressure sensor) and determine which setting based on a photodiode.
The PCB's could be replaced with a flex PCB which integrates the heating elements (Vegetable Glycerine boils at 290C, whereas Polyimide can do 400C for a short while). Construction of the whole device can then involve putting the PCB inside the injection moulding machine for the cavities, eliminating all assembly steps, joints and potential leaks, and reducing part count
Not when the MCUs might cost a penny and the other parts aren’t much more.
Putting high power electronics and analog into the same custom silicon as a custom digital logic is nontrivial. They’re made on different processes.
As long as you aren't interested in multi-Mhz operation, combining the rest at very low cost isn't too tricky.
But simplicity isn't always the goal. I have a throwaway vape here with a color LCD screen that plays full-motion animations.
To be sure, that's not necessary at all. But this functionality does exist, and people do buy them.
IIRC, they're said to use a 48MHz Cortex M0 part. More information here: https://github.com/ginbot86/ColorLCDVape-RE
Right, which they already get from a $0.01 MCU
Combining an MCU and multi-amp power transistors into the same package is expensive.
I mean relatively it absolutely is high power. The quiescent current on that thing has to be microamps…
It’s just funny because to me “high power” is hundreds or thousands of watts. Like an incandescent light bulb or a hair dryer. Or at least it was until I started tinkering with battery powered microcontrollers and doing math to realize exactly how long an 18650 might power a small strip of individually addressable LED’s…
“High power” is a very relative term :-)
Your estimate is 1-2 orders of magnitude too low. Small vapes pull a couple amps, as I understand it. Larger vapes can pull over 50-100W. The modded ones into the 200W range. These things can use more power than most CPUs for the brief moment they're on.
The power draw is so high that vape fans compare and review batteries to show which ones can sustain the most power output.
It's an unexpected boon for those of us who use batteries for other things: The vape craze has made more high current batteries available with a lot of user contributed test data.
It has a separate magnetically attached battery / charging unit. I have to charge 5-6 times per "tank" that's attached. The battery side also has a mini-led display showing animations and battery / juice left so it's actually communicating with the tank side. A kit with battery and tank runs me about $25, but the tank alone is about $20. So they add $5 to cover the battery / charging component. It's a vice, but at least with this brand I'm not throwing away batteries weekly.
There's two limiting factors for 'smart dust': power (batteries are the majority weight and volume of this vape), and antennae (minimum size determined by wavelength of carrier wave).
I believe you can fit an NFC module in a 5x5mm package, but that does externalize the power supply.
RFID is historically powered by one of three methods,
one of which is completely wireless/battery-free.
Maybe the smart dust will have to eat microbes and stuff to stay active.
As for communication, we can’t go shoving antennas in them as then they’d be larger than dust. And you can’t use the optical part of the spectrum because of interference with basically everything. You can’t use wavelengths smaller either as you get into UV and high radiation. There is the terahertz radio spectrum [0] between 3mm and 30um that is pretty open and not utilized at all because we haven’t figured out how to make good transmitters. Plus the spectrum isn’t very useful as it isn’t very penetrating and water vapor absorbs it… and it requires lots of power.
Smart dust might have to be more of a distributed computer or something. Or a micro machine that uses chemistry and mechanical magic to do its operations.
[0] https://en.wikipedia.org/wiki/Terahertz_radiation
Cheap for a 1980s computer, now pennies. Wild.
So, probably enough to land on the moon. And cheap enough to justify a dozen backups.
So you end up with something that could probably be coaxed into running DOOM at playable FPS (if it had enough RAM and a display) relegated to running a humble - and frankly objectionably wasteful (coupled with questionable health outcomes with long term use) - disposable vape.
LCSC says between 6 and 8 cents in volume:
https://www.lcsc.com/product-detail/C5292058.html
500+ $ 0.0802 2,500+ $ 0.0727 5,000+ $ 0.0682"
I am now wondering if it's possible to put a ZX81 emulator on one of these microcontrollers. It would need to emulate the Z80 but you've got plenty of spare cycles, and 3x the ROM and RAM of the original, so enough space for a small emulator!
Is that inflation adjusted? If not, the real cost difference is even starker.
It’s beautiful, I love it.
This sentiment is the case because very often that's where recycling ultimately ends, we just pay someone to move it far away from us so we don't have to see it when it happens.
Until 2018, when they finally stopped accepting it, one of the US largest exports to China was cardboard boxes sent over for "recycling". We burned tons of bunker fuel shipping back the boxes Chinese goods arrived in. The net environmental impact would likely have been less had we just kept the boxes at home.
It's strange to me how often people prefer a widely acknowledged lie than to simply admit the truth.
I always recycle though because the recycle bin in my city is larger than my trash bin, and I don't have enough room in my trash bin sometimes.
I won't speculate about whether the plastic on the board is recyclable, or ecological to recycle. I don't know. This is what I'm asking.
The fundamental problem with "recycling" is precisely the fact that we just hand it off and don't ask questions about where it ends up, all while feeling great about ourselves afterwards. Bestbuy and Staples are offering accountability laundering so that you don't have to feel bad and in exchange are more likely to become a customer. The 3rd parties working for them do the same thing, but they usually want cash for it.
Metals, especially aluminum, get widely recycled because it actually makes financial sense.
Plastics, well, you are probably better off burning them for electricity.
I wouldn’t really call that recycling.
But yes, not proper recycling.
Edit: I'm actually curious l, i don't know how recycling supposed to work for electronics and how it can be a scam.
https://www.youtube.com/watch?v=PJnJ8mK3Q3g
(The above is not so much about processors, but about plastics. As long as we are still burning any fossil fuels at all, we are probably better off holding off on recycling and instead burning the plastic for electricity to use ever so slightly less new fossil fuels for power, and instead use the virgin fossil fuels to make new plastics.
Especially considering the extra logistics and quality degradation that recycling entails.
Directly re-using plastic bottles a few times might still be worth it, though.)
The World has limited resources, we don't have a spare.
Do you need it spelling out more clearly?
Also, if you go for measures like mass processed, the weight of microchips, pcbs, parts is only a tiny fraction of what has to be processed and build in the supply chain.
Agreed that it is smarter to use oil for plastics then to burn it directly.
My argument is that as long as we are still burning oil and gas, we might as well burn old plastic instead of new oil and gas.
If/when we stop burning oil and gas, then we can think more seriously about recycling plastic.
1) Plastic is not liquid, so you can't pipe it to a gas or oil power plant. You may argue that coal isn't liquid either, but continue reading...
2) Burning plastic generates toxic fumes.
3) Plastic ash is sticky and very difficult to clean.
It's a fascinating topic. There's even more problems than the ones you bring up, but engineers are also pretty smart.
The world has effectively infinite resources, getting more is usually just a matter of figuring out better extraction techniques or using better energy.
For example at 1% energy growth per year it would only take around 9-10k years before to reach an annual consumption equal to all the energy in the Milky Way galaxy. By "all the energy" I don't just mean consuming all the solar energy from all the stars, and using all the fissionable material in reactors, and fusing everything that can fuse, and burning all the burnable stuff. No, I mean also using all the gravitational potential energy in the galaxy, and somehow turning everything that has mass into energy according to E=mc^2.
From there at 1% annual growth it is only another 2-3k years to using all the energy in the whole observable universe annually.
Population at 1% growth also gets out of hand surprisingly quickly. If we don't get FTL travel then in about 12k years we run out space. That's because in 12k years with no FTL we can only expand into a spherical region of space 12k lightyears in radius. At 1% annual growth from the current population in 12k years the volume of humans would be more than fits in the sphere--and that's assuming we can pack humans so there is no wasted space.
We actually have population growth under 1% now, down to around 0.85%, but that only gets us another 2-3k years.
Sure, like effectively infinite atmospheric carbon sink, effectively infinite Helium, effectively infinite fresh water, effectively infinite trees ... we've treated these things as true, because the World is big and population of humans wasn't so big we've got away with that for a time, now those presumptions are coming to bite us, hard.
Yes, we can work our way out of some holes, maybe all of them. But we have to make things sustainable first, then spend those resources. We're not wizards, deus ex machina only reliably happens in movies.
A little Malthusian.
Directly reusing plastic bottles that were not meant to be is bad for your health though, isn't it?
If you just opened it and drank the drink in it, there's probably no harm in filling it soon after and using it a few times like that. Using that same disposable bottle for a few months is probably not a good idea.
You need to offer an incentive (ie: discount on new vape if you recycle) and then, from my experience, most people will recycle.
Here in NY as a cannabis user, one of the brands available that offers vapes (Fernway) offers a recycling program at dispensaries. I get 10% back off my next vape/cart if I return the old one to the recycling dropbox. My dispensary also keeps how many I've returned on file if I return extras, so I keep a 'balance' of disposables returned for the discounts.
Especially since both the waste created in the process of making the device and the e-waste created with it's disposal are somebody else's problem!
When computers become disposable, their programmers soon become disposable as well. Maybe, you shouldn't love it.
I feel like, pioneers of the past would be rather disappointed with us.
I mean, primarily we're not using this ridiculous power to solve actual problems, but to enslave one another in addiction, mindless consumption and manufactured consent to a lesser life.
Almost 100 years later, now with computer enabled misinformation and agitation campaigns by tech oligarchs, a new fascism is on the rise and Alan Turing would be called an abomination, again.
These things should have 100 times the deposit amount of a can of soda with mandatory requirements for retailers to take the 'empties' back.
Everybody makes fun of paper straws. Or they made fun of wind power when it was barely 0.1% of energy production. Why not immediately demand 20 years ago that all single use plastic is banned? Or that only wind and solar are allowed? Because the step is too big, it would not be accepted. You need to take one step at a time.
That's even a viable strategy against procrastination. There is this big daunting task. So much to do! Oh my, better scroll a little tiktok first. No, just take a small first step of the task. Very small, no big commitment. Then maybe do some tiktok, but the little first step won't be too much. Result is, you have an immediate sense of accomplishment and actually made progress, maybe even stay hooked with more steps of the ultimately big task.
Yeah, because they suck. Uh, pun not intended. Paper straws get somewhat soggy and feel bad in your mouth. They are inferior to the plastic straws they purport to replace, so people resist them as much as they can.
If you want to actually make a difference with an environmental effort, you need to make something superior. Nobody makes fun of LED light bulbs because (up front cost aside) they are wildly superior to incandescent. People actually like having LED bulbs and seek them out. The same cannot be said, and likely never will be said, of paper straws.
https://fortune.com/well/2023/08/24/paper-straws-harmful-for...
What a stupid joke.
Moreover, paper straws are not even recyclable due to water content which makes them soggy. Plastic ones are almost 100% recyclable
Most importantly, unlike plastic straws, they are laced with glue and other chemicals which gets ingested.
Nope, that's a myth. Plastic is essentially unrecyclable. Some types of plastic can be made into "lower" quality types with lots of effort, but there is no circular reuse. The oil and plastic industries want to make you believe that this is all a solved problem, but it very much is not.
In contrast, paper and wood products just rot away at the end of their life, and a new tree grows in their place.
It's the same for paper and cardboard, and it's much better to reuse it as much as possible to avoid cutting a tree. Letting it rot releases the same amount of CO2 than burning it, by the way.
https://plasticsrecycling.org/how-recycling-works/the-plasti...
Excess CO2 in the atmosphere is driven by burning fuels that aren't being actively produced via recaptured atmospheric CO2, such as petroleum.
And the fundamental issue with recycling plastic is that the raw ingredients for virgin plastic are basically free as a byproduct of fuel petroleum extraction. If I want octane, hexane, methane, propane, etc. for fuel, I'm also going to be pulling up and separating out ethane, which is a very quick steam crack and catalyzed polymerization away from polyethylene.
It’s more okay to make things out of paper than plastic, yes. Plastic waste and microplastics are a huge problem. Trees are a renewable resource.
> Moreover, paper straws are not even recyclable due to water content which makes them soggy. Plastic ones are almost 100% recyclable
Plastic straws are almost never (literally never?) recycled. Paper straws are supposed to be fully biodegradable.
> Most importantly, unlike plastic straws, they are laced with glue and other chemicals which gets ingested.
But yes, this and the usability issue make the other points moot (n.b. leaching harmful chemicals is a concern that also applies to plastic straws and paper cups). The vast majority of existing straws should be replaced with no straw, and most beyond that with reusable straws.
I swear every other one leaks right away, and those that don't can only be refilled once or twice before they do. So you end up going through like 10 of those a day. I also don't know how "eco-friendly" they actually are, since there's a picture of a dead turtle on them under a text to the effect of "don't throw out in nature".
I guess on the plus-side, our company at least provides ceramic cups to their internal employees. But since it's the employees' responsibility to clean them, not everybody is off the disposable cup train.
Paper cups are still provided, but it is intended visitors not people who work in the building.
Yeah, if you're using that many, the solution is, and always has been, to get a proper reusable cup (ceramic, glass, whatever).
Especially in situations where people don't even have an assigned spot in the office anymore, it's not exactly shocking that many will choose the easier route.
Uhh.. yes? Trees can be grown, just like any agriculture product.
> Plastic ones are almost 100% recyclable
In theory. However that rarely works out in practice, due to the complications of mixing various types of plastic in a single stream of garbage.
> Most importantly, unlike plastic straws, they are laced with glue and other chemicals which gets ingested.
The glue for paper straws will be a biodegradable water-based adhesive. It may be finished with natural wax. And that's it. I think you are intentionally spreading FUD saying glue and chemicals.
That being said, I hate paper straws. I like bamboo straws though.
It is when you're trying to suck a thick milkshake through one, though...
There's burgeoning movement called "PWM sensitive"[1] that's opposed to (cheap) LED lights.
[1]: https://old.reddit.com/r/PWM_Sensitive/
Classic replacement of something good with something terrible so customers opt out
There was huge resistance to wiping out the inefficient bulbs in the UK. Many many people stockpiled them.
There are a variety of conditions that straws are helpful for. A lot of people have health issues that make it difficult to swallow. A lot of people have mouth and lip conditions.
What I don't understand is all the moaning and groaning about the smallest piece of plastic that helps a LOT of disabled people have a semblance of normalcy, when here are much larger plastic fish to fry. We use plastic for basically everything but people have tunnel visioned on a minor piece that actually helps people. It's myopic.
> What I don't understand is all the moaning and groaning about the smallest piece of plastic that helps a LOT of disabled people have a semblance of normalcy
You have to admit it's been turned into a culture war point by people who mostly don't need straws. They just need boogeymen to rile up people against environmentalism in general.
You're missing the fact that this sort of infrastructure requires a robust business case. That's why scale is critical.
Recycling bottles and cans has a solid business case. Glass and aluminium are straight forward to recycle at an industrial scale, but would be pointless if they were kept at an artisanal scale.
Any moralistic argument is pointless if you can't put together a coherent business plan. The people you need to work and the energy you need to spend to gather and process whatever you want to process needs to come from somewhere. How many vape pens do you need to recycle per month to support employing a single person? Guilt trips from random people online don't pay that person's rent, do they?
> Everybody makes fun of paper straws.
This is specious reasoning. The core issue are tradeoffs, and what you have to tolerate or abdicate. Paper straws are a red herring because the main criticism was that, at the start, they failed to work as straws. So you were left with an industrial demand to produce a product that failed to work and was still disposable.
If you look at food packaging and containers, you are faced with more thought-provoking tradeoffs. Paper containers don't help preserve food as well as plastic ones. Packaging deteriorates if exposed to any form of moisture, and contaminates food so quickly tk the point you can taste cardboard if you leave them overnight. This leads to shorter shelf life and more food waste. Is food waste not an ecological problem? How do you manage those tradeoffs?
Yeah, we had that. Glass milk bottles and coke bottles and bulk goods sold out of barrels by the lb rather than in plastic bags.
But then plastic took off and soon after Big Sugar paid a PR/lobbying firm to run a campaign with a fake Indian crying a single tear and calling every Tom Dick and Harry a “litterbug” and now the pile of garbage is our fault, not the manufacturers.
In Germany, it is such a big issue with people not having other source of income, that there is a culture where and how to leave the bottles around so that they are easier to collect.
I don’t have an issue with it, if they want to do what I am too lazy to do, more power to them.
Maybe the process could be emulated.
The collection mandatorily happens in the shops that sell electronic devices, you don't have to return them to the exact store where it was purchased, as long as they sell similar devices they cannot refuse to take it back (without paying anything more). It works pretty well, even if shop owners/workers aren't always pleasant when you return something.
[1] https://www.erecycling.ch/en/privatpersonen/blog/vRB-Vorgezo...
I call bullshit on these initiatives. It is a tax, period. The government collects money and it does... stuff. It is not a deposit, so it doesn't incentivize people to return the thing, and it is too general to de-incentivize particularly bad products like disposable vapes.
The tax can be used on recycling efforts, and it probably is, however you don't need a specific tax for that. These investments can come from other sources of government income: VAT, income tax, tariffs, etc... I don't think people are paying a "presidential private jet tax" and yet, the president has his jet, and hopefully, all government effort for the environment is not just financed by a small, specific tax. Saying a tax is for this or that is little more than a PR move, they could do the same by increasing VAT, and I believe it would work better, but that's unpopular.
> The collection mandatorily happens in the shops that sell electronic devices
That is more concrete.
https://cdtfa.ca.gov/taxes-and-fees/covered-electronic-waste...
Any items found by garbage program will be collected and returned to manufacturer at cost.
All items sold in country must be identifiable for this purpose. Importers are considered the manufacturers and must retrofit products.
Then we would be getting closer to capturing the total burden to society.
Well that Charmin bear will certainly have his work cut out for him
Do you want to live in a world where only the rich can afford washing machines?
Incidentally, I don't know what you do, but once in a while I throw (carefully, li-ion batteries) my broken electronics in the trunk and bring them to the local collection center.
https://www.amazon.co.uk/gp/help/customer/display.html?nodeI...
Not all stores do that though, if I buy from one that doesn't I can call my local recycling center and they'll eventually get around to picking up the old appliance from your home.
However, this is not done by the manufacturer or importer, as the OP suggested. There are separate organizations and it's paid for via a tax on new device purchases.
Which means a new washing machine manufacturer doesn't need to worry about having their own recycling infrastructure. And I move that the recycling tax I pay for national level recycling adds less to the price than $NEW_COMPANY building their own, just for their models.
The properties of your running water and the presence of very much moving parts in the former?
It's one of them new solid state washers designed by "AI". Very advanced technology!
But if you think it through, it's intractable. You need to 2x+ the transportation cost of all products (it will cost more to get them back for multiple reasons, including products not being as neatly packaged and often going from many-to-one transportation to many-to-many). Companies also need to double their specializations and adopt recycling processes that will largely be redundant with other companies; you basically make it impossible for small companies to make complicated products. And are we including food products, the majority of trash? It makes a lot more sense to centralize waste repurposing and benefit from economies of scale.
Waste management is already a very profitable industry. Of course, it's wasteful, just burying stuff, and environmentally harmful. But I'm of the opinion that it will soon be economically viable to start mining landfills for different types of enriched materials, and government subsidies could bridge the gap for things that are of greater public interest to recycle.
I've been working on the software side of the technology needed to do this in my spare time for a couple years, waiting for some hardware advancements.
As with all economics, it's not a one-way street. A change in conditions causes a change in behavior. Increased costs will cause a change in how products are designed, manufactured, used. If one-time use cost goes through the roof, suddenly all vapes will be multi-use. Plastic bottles will disappear in favor of dispensers and multi-use bottles. Not all of them, but most of.
It's about incentives in a dynamic system, not spot bans in an otherwise static world.
I think 3rd parties would spring up to deal with that stuff
The world was full of new computers popping up and every middle class or above person buying new ones like they do with iphones now. Companies started recycling programs, and many immediately went the route of corruption. They would pack up shipping containers full of ewaste, with 40-50% reusable items, and the rest junk, allowing them to skirt the rules. These containers would end up in 3rd world countries, with people standing over a burning pile of ewaste, filtering out reusable metals. There was, at one point, even images of children doing this work. The usable items were sold dirt cheap, with no data erasing, leading to large amounts of data theft, and being able to buy pages of active credit card numbers for a dollar.
We are talking about less critical things now, like vape pens, but its not a far throw for it to instantly become an actually bad idea to let other companies do the recycling. Make the manufacturer deal with it, or even the city/state, via public intake locations (like was mentioned of switzerland in another part of this thread)
People don't buy this because it's crap. They buy it because it's cheap.
This is an interesting thread to pull on. Why is it so inexpensive for the east to make plastic garbage and sell it to the world?
A lot of people wouldn’t want this because it’s asking for stuff to become more expensive for them.
That said, I got quite into this stuff a few years back, and determining "true" cost can be harder than it sounds. Externalities, positive or negative, have to be measured against a baseline, and deciding on where that sits is subject to opinion and bias.
Every bit of plastic humans have made still exits, bar a small amount we have burnt.
That’s concerning.
Now, that plastic is too tough and durable for any modern microbes to decompose it, and it's starting to build up too. It stands to reason that microbes will eventually evolve the means to digest it and make use of this abundant, under-used energy source. In fact, some already have [1], but it's still early days.
I'm not pro-pollution, but this is far from the first ecological disaster that the global ecosystem can probably adapt to.
[1]: https://en.wikipedia.org/wiki/Plastic_degradation_by_marine_...
* https://energyeducation.ca/encyclopedia/Oil_formation
* https://en.wikipedia.org/wiki/Petroleum
these other sources all assert that
That’s a hell of a way to kick the can down the road.
I don’t have sea views, but if I wait, sea views are coming.
I'm not kidding :)
Yes, but making them deal with it would create a massive incentive to either reduce the amount of rubbish they make, or to make it recyclable/processable.
The great garbage patch in the Pacific is growing fast. The plastic is ending up in everything. We need to do better.
Make less waste. Use less plastic.
And it just doesn't matter. It's a tiny amount of mass / volume.
> The great garbage patch in the Pacific is growing fast.
Ocean plastics are almost entirely a consequence of (particularly Indonesian) fishing net waste, not Western consumer products disposed of in managed landfills. The "great garbage patch" is also very much overstating the scale of the problem; it's a slightly higher plastic density region of ocean.
Are you sure? It’s getting into food. We are eating it and drinking it, and it’s getting more prevalent.
Because 7Bn people multiplied by a few kg/year doesn't seem trivial to me, but sounds like you can prove it.
Geological strata vs shallow landfill sitting above aquifers and subject to near-term erosion.
Disposing of this stuff in deep mines seems like it'd be fine, unfortunately we haven't yet, at a society/economy level, found the discipline to do so. Presumably after a few mya of heat and pressure it'll be indistinguishable from other petrochemicals (which aren't particularly nice to begin with).
All the plastic ever produced could be stuffed back into one medium size coal mine. There are thousands of such mines and they are already ecologically disruptive.
It's a large amount when you think about the logistics to move it around the world, but a small amount compared to the total amount of stuff we take out of the earth.
https://ourworldindata.org/grapher/global-plastics-productio...
I'll assume good faith here and that you were simply unaware of the origins of the so-called great garbage patch, but in future discussions I think it would do your arguments some credence not to bring up ocean plastics in response to discussion about landfills.
Also many countries collect disposable plastic.
This guy[1] explains the problem quite well.
[1]https://www.youtube.com/watch?v=dy-wFixuRVU
Taxing waste is one part of the story but it's actually a really good thing that vaping is cheaper than smoking so this can only go so far before it's counterproductive.
I think the answers lie in stuff like banning sale of pre-filled ones. If you make people buy a separate bottle of nicotine liquid (and you enforce that this is quite a large minimum size, like we already do with tobacco) and fill the device up before they use it, I think they are much more likely to refill it when it's empty and recharge it when it's dead.
Maybe another thing could be restricting points of sale. I bet a lot of the waste comes from drunk people buying them at 10pm in the corner shop near the pub. If you make people plan ahead that might also help.
Well that is fixable, it's even one of the solutions posited here. Just make them artificially expensive by adding a deposit, which you'll get back when you return it to the shop (instead of throwing it away).
I think a better thing to do may be to try to embed disposal costs into the price of the original product. That changes prices to hopefully incentivise reuse.
I'm in favour of a full ban but it's complex
For example Germany, while the country is famous for the whole splitting the garbage, I am still waiting after 20 years to see the kitchen oil recycling recipients as we have in Portugal.
As for electronics, I would say no one has anything in place, and human nature is as such that hardly anyone will drive to the next recycling center to deliver a single device that broke down, or call the city hall to collect it.
We should go back to the old days, when electronics were repairable, which naturally companies will lobby against, as that will break down the capitalistic curve of exponential growth in sales.
In Dutch Mediamarkt, the same company as Saturn in Germany I believe, they have bins for electric devices.
https://allaboutberlin.com/guides/sorting-trash-in-germany
However that doesn't change the disposable garbage thing, I bet most of them land in some African landfill instead of being properly recycled.
And then there's a huge bin of damaged LiPos just chilling by the front door. I'm astonished we don't hear about fires in these bins.
I Portugal there is Rede Electrão. You can deposit those devices in a lot of supermarkets, stores and fire stations.
Because German environmental policy is about virtue signalling to keep the plebs busy, not solving environmental problems. Nuclear power plants replaced by coal and natural gas, obsession with recycling but nothing done about disposable packaging, car regulations and city design dictated for decades by the car manufacturing lobby, combustion engine limits/bans only when said manufacturers thought they could get on the Tesla gravy train and subsequently rolled back when reality became apparent, it just goes on.
https://www.prio.pt/pt/prio-ecowaste
This is only one of the places, there are others where used oil can be brought in.
If there were a deposit scheme of say five bucks a piece, I'd wager you'd see >80% return rates with every purchase.
Addictions exists. To stop smoking is HARD. Nicotine addition us on par with benzos, prescription opiates or amphetamines.
It's not profitable to recycle small electronic devices otherwise you'd see heaps of shops doing it. It's toxic, hazardous and labour intensive.
100 times the deposit amount would be like $5-10 USD per-device which is insane. I do agree that any retailers should be required to take back empties and dispose of them responsibly.
Sounds like they should be banning their sale and/or production then, just like many jurisdictions have been with plastics and other non-recyclable items. These devices are not an essential-to-life item where the waste produced is justifiable, especially when you consider the LiPo batteries, which are a borderline-environmental disaster from the moment the lithium is mined to the day that battery finds its way to a landfill. Why single-use disposable vaping devices exist in the first place is somewhat perplexing given permanent/re-fillable ones are also available, often right beside the disposable ones, and generally offer a significantly lower cost of ownership.
I suspect you could make the same argument for manufactured cigarettes vs pipe tobacco. It seems people will pay for convenience.
https://www.bbc.com/news/articles/c62vk0p5dn5o
Trash compactors break the batteries in these things. A deposit could help to ensure that the vapes are disposed responsibly.
Other option: Add an "electronics" bin everywhere. Though that would be more expensive and less clear how effective it would be.
This is done for components like starter motors, alternators, power steering pumps, batteries, and a variety of other components. The complex components are re-manufactured to like-new specifications and the less complex components are recycled to recover materials. The battery is a probably the only component where the potential ecological impact drives the cost of the deposit.
If i do not pay, i always return the cart.
Looking at this device it feels like it shouldn't be hard to have a reusable base with battery and electronics, and a disposable capsule that attaches on top but is replaceable.
you can choose to either vape a flavour version only, or one containing a certain amount of nicotine
Here's a slightly old investigation finding 40% of ewaste being shipped off to china: https://www.ban.org/news-new/2016/9/15/secret-tracking-proje...
Someone imported it, someone's selling it in the stores.
If the price of the "disposable" is, say, £5, make the deposit £50. Suddenly all the vapes will end up back at the retailer.
And make sure retailer has the financial incentive to return the used disposables and that's it.
I'm confident the lawmakers have been bribed to refuse to tackle the problem, otherwise how you can explain minimum price on plastic bags but tolerating toxic landfill fires and staggering waste of lithium (recycling will inevitably br fixed soon).
Even in the UK, they've added restrictions to it but...surprise, surprise the Turkish/Kurdish corner shops all have a steady supply, with nothing being done about it. As a foreigner living here it's honestly pathetic how disengaged the public here are with things like that. People drive like absolute wankers, too.
Yeah, the deposits for cans are a bit stupid: people already widely recycle aluminum (and scrap metals in general) purely for commercial reasons. No need for extra regulation there like mandatory deposits.
I've lived in places with no deposits and there is much much much more littering compared to places having deposits on every types of metal/plastic beverage containers
Quick Googling suggests I'd pay less than 30 euro for a liter of VG. What about for the nicotine concentrate? I'd pay about 20 euros for 100ml of 20mg/ml concentrate.
Many daily life, single use objects have a lot of thoughts put into them: https://www.youtube.com/watch?v=pj0ze8GnBKA
Is this person really brave, or just unaware of the risks?
https://www.lumafield.com/article/finding-hidden-risks-in-th...
[0] https://github.com/atc1441/Vape_DOOM_ScreenShare
It seems almost absurd to what length humanity has gone just to satisfy it's primitive needs.
IMO this is as much a "we are hopelessly dumb monkeys who just want to satisfy ourselves" as as it is "there's clever monkeys who know and exploit our monkey weaknesses so they can make more money."
- build these vapes and sell them for a few dollars? - tear down an entire house, rebuild a new one from scratch, and sell it? - ship things all the way across the entire freakin ocean instead of manufacturing them locally? - mine cryptocurrency?
To me the answer is always fossil fuels. We stumbled on an energy source so dense (at first, seemingly) infinite that it just wildly increased the amount of energy we can use. For most of human history our greatest constraint was energy, then that constraint was just blown the fuck off.
I feel like our whole society is riding a high of cheap energy. We attribute so much progress to things like science and democracy and great thinkers and revolutionaries. But how much of it was really just fossil fuels and nitrogen fixing??
--source, my butt.
Most likely a promotional from the looks of it. I myself stumbled over it a about a year ago, when someone posted it on an IRC channel.
Later at 6:45 they show more people testing them
That said, it wouldn’t surprise me if he does it all day long, 6 days per week.
And this is before we get into dealing with the battery -- which has its own set of risks.
(One of the early sources of funding for MyNewt development was a company that made vapes. Though not disposable ones if I remember correctly).
Also, the MCUs they use are very cheap. They are cheaper than having lots of specialized discrete electronics.
I talked to someone who worked on developing vapes and they spent much, if not most, of their engineering on safety-related issues. They may be an outlier. The reason I remember is because I was surprised how dangerous these devices really are if you get things wrong.
As a software engineer with some hardware experience, I would never use a vape. It strikes me as way too risky. Much for the reason you point out: the companies probably don't care more than they are forced to by regulations.
My home country (India), and others (Singapore, others?) have outright banned all electronic cigarettes which is a regulation I hate. I acknowledge that vapes reduce barriers to entry to kids. This is partly solvable in countries with strong governance.
But disposables? Ban that shit
The issue is that to the end user this is still tangibly the same product - and mostly gets treated in much the same way as the original "disposable" vapes.
https://www.unodc.org/LSS/Announcement/Details/8afbc6e8-9439...
The truth is you can mix your own vape juice from just PG, VG and nicotine. Which are completely harmless to eat (except nicotine) and used in food products. A more rational discussion would be about if inhaling PG and VG is harmful to the lungs, or the additional unregulated stuff you find in flavoring of vape juice.
I fully support banning these things. It's impossible to regulate effectively without.
https://www.ft.com/content/f72f17e4-a83d-4494-b1e7-a349cc7ae...
Many places apparently don't even sell the refills so it's practically the same.
It's one of those UK laws of "we are doing something!" but not actually do anything. These companies either pay backhand or know how to skirt around the rule. Who's enforcing it?
Kids don't have to hide proof of their consumption in their bedroom (well at least until they are hooked enough they can't spend a night without vaping). They buy, consume and throw away before reaching home.
That would require a crazy high amount of smoking. AFAIK, disposable vapes usually last about a week.
But reuseable vape has more stuff to manage and hide, and they are more expensive in short run.
Same thing with batteries. Ridiculous volume -> low prices. (Laptops and cell phones is why we have usable electric cars. If the EV industry had to drive up the volume all on its own it would have taken much longer to develop that industry)
Wait, what? Where's the sense in that?
Also, when you do get juice online or from other states, it doesn't hit as hard / the same as whatever they put in the disposables. Someone told me it's because the disposables have vitamin E acetate in them that makes the nicotine get absorbed into your blood quicker.
I think the disposables go around more regulations, which mean the chinese manufacturers can put more addictive stuff in the pods / disposables.
https://en.wikipedia.org/wiki/2019%E2%80%932020_vaping_lung_...
The FDA just hates flavored nicotine products because they're appealing (to both adults and children), and the FDA doesn't want nicotine products to be appealing (because nicotine is perceived to be a public health problem on the scale of tobacco).
You want to buy a disposable? Ok, here, $20 and you're done.
But if you want to make the oil at home? Ok, $2000 for lights, timers, nutrients, seeds, and a grow tent. Plus another ~$10,000 for a basic short path distillation setup. And honestly to make anything close to what you get in the disposables, you'll need to hire an expert with experience. And you need a lot of space for your new secret lab. For 99.999% of people, it's super not worth it to make at home.
I promise you, if it was easy, you would see more people making carts. I tried C02, water wash, sifting, heat press, everything you can think of. Its nowhere near the same. And that's just for the bare minimum distillate. We're not even talking about live resin or anything fancy.
You basically need a small factory to get close to the quality of the carts.
And my home grow prices are low. You cant just grow 2 or 4 plants if you want even a small steady supply of full melt wax. Like, 20 plants minimum is more close. And they have to be good. Living soil, aeroponic, whatever you want.
And that's if you can get actually good yield. I've seen people get such bad yield that they turn 1 pound of flower into less than 3 grams of wax. That's why you need an expert. Even putting together a successful distillation operation is no joke. Besides chemistry knowledge, you need lots of "industrial equipment" knowledge. We're not talking about using a heat press or a curling iron to make "dabs". We're talking about making the real shit.
To be honest 10k is in the range of the cheapest alibaba eqipment. Most commercial outfits, even smaller ones, use much more expensive equipment.
This is why people prefer to just buy it from the store for $20.
I hate anything added to the air. Even perfumes irritate and make me sneeze in high quantity.
Nicotine policy and policing has been a clusterf - not only are there wasteful disposable vapes everywhere, but a thriving black market that has lead to firebombings and murders.
In fact, nicotine habits can be harder to kick than heroin. I know plenty of people who have tried to kick nicotine many times and cannot stay off of it.
Anyway, it's moot, because outright banning tobacco is insane.
Kind of odd because the withdrawal is, physically, less taxing than caffeine (never mind opiates...), and yet the brain rewiring to chase the hit is somehow far more pernicious.
You can't "just ban" it or "ban it properly". You would get a very nasty black market and things with such ban.
The current government has started rolling back decades of progress, and SURPRISE, they have close ties to the tobacco industry including MPs who worked for tobacco companies.
As mentioned upthread, Australia has been running a similar strategy of trying to tax smoking out of existence and all that's happened is they've rediscovered the Laffer curve as well as pushing otherwise law-abiding citizens towards illegal tobacco.
There's a limit to how much sin tax people are prepared to put up with. Either its legal to consume or it's not, and vapes are far less objectionable to be near by than traditional cigarettes. It bemuses me that Aus, NZ, Singapore etc have gone down the path of trying to ban vape usage when the alternative is far worse.
"The more you tighten your grip .. " etc.
Having just spent a bit of time travelling, I think vapes are worse to be near than cigarettes or cigars.
Walking down busy street in the UK is just so gross. The sickly sweet strawberry, cinnamon etc. I’d prefer tobacco smoke.
And at least there was some etiquette around tobacco smoking. You don’t often encounter it inside, in planes, trains, theatres, malls etc. all those were going on this month.
https://www.rnz.co.nz/news/political/573271/casey-costello-b...
https://www.rnz.co.nz/news/national/579431/absolutely-ludicr...
Doesn't seem to have stopped kids getting their vapes yet I need to import my cannabis vape via the black market.
Eventually it'll prove very impactful with the youth, it'll reduce the number of users and make it more cost prohibitive to be so prolific as it is right now.
I don't think the post you're responding to is saying that vapes should be banned. Just disposable ones.
I too am agnostic but do not understand this reasoning. BTW let me get severely downvoted by saying that if alcohol prohibition came up for a vote I'd vote yes in a heartbeat.
It reduced the amount of people who drank and it increased health. It increased safety for women and children and reduced violent crime on the streets and in the home. It reduced alcohol related diseases and death. People missed less work. Like with passive smoking, a ban on alcohol positively affects non-drinkers too.
It was the organised crime side effects and societal unpopularity which lead to it's "failure". Alcohol prohibition continues to work in some countries today but I wouldn't want to live there.
Ultimately it's a bio-ethics and freedom issue, issues that continue to raise their head from time to time here and there, e.g. coronavirus responses.
Control of vaping could also be classed in this category.
It doesn't stop addicts from craving and it doesn't curb the appeal of the product. People who think tobacco/nicotine bans would work are people who think they don't have any positive effect associated with them.
People don't smoke because the evil cigarette companies tricked them and now they are addicted. It's a drug, it feels good to do it.
A tobacco/nicotine ban will end up exactly like aby other recreational drug prohibition.
Isn't this exactly what happens, and why cigarette advertising is banned in many countries, and why marketing child-friendly tobacco products is commonly restricted, and why there are even regulations/guidelines around portrayal of smoking on TV in some regions?
I think not banning the cigarette and non reusable vape is the wrong solution but banning smoking in lots of public spaces has improved the situation, maybe not to curb consumption but at least non smokers can breath a little. I wish it would also applies to outdoors cafe/restaurant terraces too as smokers effectively ban to non smokers by spreading their poison around them. They could walk away for a couple of minutes to get their hit but they don't on purpose. There should be a radius around an outdoor terrace where smoking is effectively prohibited.
If you really don't like it, you could just not visit these establishments. To these businesses, the benefit of allowing smoking doesn't outweigh the negatives (some people not liking it). Obviously you don't not like it enough to just not go there. Not a smoker, but i've never understood this puritanical attitude towards smoking and only smoking. Yeah, it's not great to breathe in an enclosed space, but in an outdoor space, I don't see how much worse it is than car exhaust, air quality, etc.
Well I go inside, because there are no establishment in my area that ban smoking in their terrace.
> it's not great to breathe in an enclosed space, but in an outdoor space,
It is exactly the same unless there is significant wind is in a direction that push the fumes away. Obviously it depends on how tightly the tables are put as well but it is just super annoying. I have a friend whose eyes turn red immediately when exposed to tobacco product fumes and he suffers way more than I do.
Also it ruins the taste of food and drinks.
> I don't see how much worse it is than car exhaust, air quality
Usually those that are close to traffic and car exhaust are less popular than those that are less directly Unless you live in a complete smog, cigarettes/vapes fumes that goes directly to your face are always more annoying.
You would have compared to sweaty and smelly bodies in a dance club you would have got a point.
This thread is/was about prohibition of smoking. I was making the point that tobacco/nicotine is a drug that has positive psychoactive effects, that's why people use it.
People seem to have this misconception that smoking is just some thing tobacco companies tricked people into doing and so prohibition would work. It wouldn't. We can already see in places where the prices of cigarettes create a nearly de-facto ban that it creates black markets and we know that black markets create crime.
I was suprised to see recently that ban on smoking is still not enforced in some bars/club playing music in Germany. It was like a blast from the past to me after living in countries that implemented that strict ban much more seriously for years.
I have a huge old microwave on the blocks next. After that a series of small odd ball electronic toys and a few early LED bulbs. If I ever come across a vape, I'm sure it'll make its way on to the shelf.
With regards to vapes, just look on the ground near a sidewalk. I find like 3 or 4 big depleted vapes a day in a US urban area. Closer to 15 or 20 in greater London in the UK.
There are a lot of fun parts inside microwaves (a personal favorite is the high-torque-low-speed-line-voltage motor, which I use to make creepy Halloween decorations) but the caps, transformer, and magnetron are all useful for somewhat... more dangerous... pursuits.
As far as I can tell, this is an urban legend. No consumer microwave oven has ever used beryllium in its magnetron insulators. Military radar ones, yes (and likely where the legend started.) Some specialist test equipment and RF transmitters too, and they all contain prominent warnings of it. Besides its toxicity, it's far more expensive than regular alumina.
Weren't disposable vapes banned in UK in May 2025? Is the problem still that big?
You want to make vaping even more addictive than it already is?
"One man's trash is another man's treasure."
Basically the weapons from "High on Life" or the butter robot from Rick and Morty, but as a vape.
https://hackaday.com/2025/09/15/hosting-a-website-on-a-dispo...
When herbal vapes for cannabis came in around 5-10 years ago, it was the catalyst that started all this. Pax are the main manufacturer of these disposable vapes and one of the first on the scene to push THC following with nicotine. These were originally expensive, bulky and seen as an luxury item. I bought one, an DeVinci Ascent, I loved it.
I used it to hide that I was smoking cannabis from my parents and all the opportunities to walk the families dog and get high were wasted by playing CS:S and getting high. Teenage-hood for you.
Coil driven vapes are a different ball-game. Require actual human intervention and know-how. They are refillable in a sensible way, coils need replacing and I've seen some very cool rigs.
A USB port is pointless if you know that the user isn't going to refill the cart. If you can produce the device cheaply and not get taxed for the environmental waste. Add the R&D costs, additional safety, additional materials for the tank. What do you do with the now empty toxic tank? There are additional costs for stocking vape shops to refill the liquid. The latter is a more sustainable business option than the former.
They know the playbook. They would much prefer for you to be out with mates, stop off at a newsagents, pick up some chemical brain-rotting Dragon Soup and grab an elf-bar. Act like a twat outside of the venue and then throw it on the ground. Anything to do with vaping is foul-play. The Alcohol biz is tightly knitted with the vape/smoking biz.
Disposable also gives you plausible deniability. They get in trouble, close up shop. Relabel their brand and start again.
I also found it interesting that the mouthpiece position would be detected with microphones rather than any other electronic sensors.
Also, it's fun to imagine someone building whole racks of these (e.g. recycled ones) for a computation farm. Or a cheap home server, whatever.
Yes, there are even videos showing it on youtube.
At one point in history aluminum and other alloys were considered pretty cutting edge. As was in-house electricity and plumbing. Now, those things are just everyday stuff that gets no special regard.
When you can build disposable computers at scale for pennies, it might not be "tech" anymore in the sense of cutting edge things, and instead it's just "an average Tuesday".
ESP32 has a compute power of a PC from the early '90s (it can run Quake!), in addition to having wireless connectivity you couldn't even buy back then.
Which 10 Cent Microcontroller is Right for You? Comparing the CH32V003 to the PY32F002A.
https://www.youtube.com/watch?v=Y-n7vXHAqm8
Use regular vapes with e-juice
> Nicotine in tobacco can form carcinogenic tobacco-specific nitrosamines through a nitrosation reaction. This occurs mostly in the curing and processing of tobacco. However, nicotine in the mouth and stomach can react to form N-nitrosonornicotine, a known type 1 carcinogen, suggesting that consumption of non-tobacco forms of nicotine may still play a role in carcinogenesis
Cancer risk is more complex than just carcinogens. Nicotine is known to promote the growth of existing cancer cells, and in multiple ways. A big thing with cancer that not many people are aware of is that we all have cancer cells, and get new cancer cells all the time — but that the human immune system is normally effective at detecting and killing them before they have multiplied too much. Old cancer mutations can lay dormant or kept in check for many years, but if promoted and/or the immune system gets stressed or suppressed, they'd grow and you'd "get cancer".
Different types of E-juice also contain additives for flavour, and we still don't yet know the long-term effects of some of those — when ingested as vape — which is a different to being swallowed. And by long-term, I mean 20 years or more, which in some cases is the time a cancer cell can take from formation to detectable tumour.
Presence of the Carcinogen N′-Nitrosonornicotine in Saliva of E-cigarette Users: <https://pubs.acs.org/doi/10.1021/acs.chemrestox.8b00089>
https://www.unodc.org/LSS/Announcement/Details/8afbc6e8-9439...
It's so curious why these things are addictive. Before I tried a vape (it was called an e-cigarette back then) I thought the addictive thing about cigarettes is the nicotine. That's part of it, but a huge part (possibly even bigger) is just the sensation of sucking in smoke/vapour from a little stick and exhaling it. Is it similar to sucking on a mother's teat or something? It really seems to satisfy in a way nothing else does.
In the UK truly disposable vapes are banned, thankfully, but I do wonder if it's now just "technically refillable" ones that people use one time. They should be taxed to the eyeballs to encourage reuse if so.
Hosting a WebSite on a Disposable Vape https://news.ycombinator.com/item?id=45252817
Please have a read:
https://pirg.org/resources/vape-waste-the-environmental-harm...
Edit: You were complaining about 'environmental' HN users, but now you've edited your comment. I guess you read the article and were convinced, that's great :)
It's truly a marvel of anti-scientific thinking.